Monday, June 7

Initial Ground Support

ေယဘူယ် အခ်က္မ်ား
ကနဦး ေျမသားပင့္ေထာက္ျခင္း လုပ္ငန္း (Initial ground support) သည္ ဥမင္ေဖာက္လုပ္ရာတြင္ အလြန္အေရးႀကီးေသာ လုပ္ငန္းအဆင့္ျဖစ္သည္။ လြန္တူး-ေဖာက္ခြဲဥမင္တူးစနစ္ (Drilling and Blasting Method) တြင္ ေျမသားတူးေဖာ္ၿပီးသည္ႏွင့္ တၿပိဳင္နက္ ေနာက္တစ္ဆိုင္း ေျမတူးလုပ္ငန္းမစခင္ တပ္ဆင္ရသည္။

ဥမင္တူးေဖာက္စက္ (TBM) ကို အသံုးျပဳေသာ ဥမင္တူးစနစ္တြင္မူ ေျမတူးလုပ္ငန္းႏွင့္ ေျမသား ပင့္ေထာက္မႈလုပ္ငန္း၊ ဥမင္နံရံတပ္ဆင္မႈ လုပ္ငန္းတို႔သည္ လုပ္ငန္းအဆင့္လိုက္ အစီစဥ္တက် လုပ္ေဆာင္သည္ျဖစ္၍ ပိုမိုေကာင္းမြန္ေသာ လုပ္ငန္းအရည္အေသြးကို ရရွိႏိုင္ေပသည္။ ကနဦးေျမသား ပင့္ေထာက္မႈလုပ္ငန္းမ်ားတြင္ Steel ribs မ်ား၊ Lattice girders မ်ား၊ Shotcrete လုပ္ငန္း၊ Rock dowels မ်ား၊ Steel mesh မ်ားႏွင့္ Mine straps မ်ား စသည္ျဖင့္ အသီးသီးရွိၾကသည္။

ေျမသားပင့္ေထာက္ျခင္း လုပ္ငန္း၏ အဓိက ရည္ရြယ္ခ်က္မွာ ဥမင္တူးေဖာ္ေနစဥ္ ပတ္လည္ရွိေျမသား တည္ၿငိမ္မႈ (Stability) ရရွိေစရန္၊ ေျမၿပိဳက်မႈ မျဖစ္ေစေအာင္ ထိန္းသိမ္းထားႏိုင္ရန္ႏွင့္ ဥမင္ေဆာက္လုပ္ေရးလုပ္ငန္းမ်ား လုပ္ကိုင္ေနစဥ္အတြင္ လုပ္ငန္းခြင္ လုံၿခံဳမႈ ရွိေစရန္တို႔ ျဖစ္သည္။ လုပ္ငန္းခြင္ရွိရာ ေျမသား၏ ခံႏိုင္ရည္အား ေကာင္းသည္ႏွင့္အမွ် ကနဦး ေျမသား ပင့္ေထာက္ျခင္းလုပ္ငန္း လုပ္ေဆာင္ရသည့္ ပမာဏ ေလ်ာ့နည္းသြားမည္ ျဖစ္သည္။ ကနဦး ေျမသား ပင့္ေထာက္ျခင္း လုပ္ငန္းမ်ား ၿပီးစီးပါက ေနာက္ထပ္ ထပ္ေဆာင္း ပင့္ေထာက္မႈမ်ား လုပ္ေဆာင္ရန္ မလုိအပ္ေတာ့ေပ။

ဤေနရာတြင္ ကနဦး ေျမသားပင့္ေထာက္ျခင္းသည္ အၿပီးသတ္ ပင့္ေထာက္မႈ တာဝန္ကိုပါ လုပ္ေဆာင္ေပသည္။ သို႔ေသာ္ ဥမင္နံရံကို Cast-in-place ျဖင့္တပ္ဆင္ပါက ၎လုပ္ငန္းသည္ အၿပီးသတ္ ပင့္ေထာက္မႈလုပ္ငန္း (Final support)ပင္ ျဖစ္သည္။ ထိုအခါ ကနဦးလုပ္ငန္းႏွင့္ အၿပီးသတ္ ပင့္ေထာက္မႈ လုပ္ငန္းမ်ားသည္ အတူေပါင္းစပ္သြားၿပီး ေပါင္းစပ္ ပင့္ေထာက္မႈစနစ္တစ္ခုအျဖစ္ ထမ္းေဆာင္သည္။

မွတ္သားရန္ အခ်က္မွာ အၿပီးသတ္ပင့္ေထာက္ျခင္း လုပ္ငန္းအတြက္ ကနဦး ပင့္ေထာက္ျခင္း လုပ္ငန္းမ်ားကို လုပ္ေဆာင္ရာတြင္ ၎၏ ၾကာရွည္ခံႏိုင္ရည္ကိုလည္ အေလးအနက္ ထည့္သြင္းစဥ္းစားရန္ လုိအပ္ေပသည္။ အေၾကာင္းမွာ အဆိုပါ လုပ္ငန္းမ်ားသည္ လတ္တေလာ ကာလတြင္ ပံုမွန္ျဖစ္ေနေသာ္လည္း အခ်ိန္ၾကာလာသည္ႏွင့္အမွ် တိုက္စားခံရျခင္းေၾကာင့္ ပ်က္စီးယိုယြင္းျခင္း (Corrosion) ႏွင့္ ပံုပ်က္ယြင္းမႈ (Deformation)တို႔ ျဖစ္လာႏိုင္ေသာေၾကာင့္ ျဖစ္သည္။

ကနဦးေျမသား အားျဖည့္လုပ္ငန္း (Initial ground reinforcement)
ကနဦးေျမသား အားျဖည့္လုပ္ငန္းတြင္ untensioned rock dowels တနည္းအားျဖင့္ (ဆြဲအား မပါေသာ ေက်ာက္သားသပ္မ်ား)ႏွင့္ tensioned rock bolts မ်ားပါဝင္သည္။ ၎တို႔သည္ ေျမသား အားျဖည့္လုပ္ငန္း လုပ္ေဆာင္ရာတြင္ အေကာင္းဆံုးနည္းလမ္းမ်ား ျဖစ္ၿပီး ေျမသား၏ သက္ေရာက္ဝန္အားကို စုစည္းေပးကာ ထိုအားျဖင့္ ေျမသားထုအား ျပန္လည္ေထာက္မေပးေသာ စနစ္ျဖစ္သည္။ ဤနည္းသည္ စရိတ္စက အသက္သာဆံုးေသာ နည္းလည္း ျဖစ္သည္။ ေျမသားထုအတြင္း တပ္ဆင္ထားေသာ အားျဖည့္ အစိတ္အပိုင္း အားလံုးတို႔သည္ အဆိုပါ ေျမသား၏ အစိတ္အပိုင္းတစ္ရပ္ သဖြယ္ျဖစ္လာၿပီး ကြန္ကရစ္နံရံသားႏွင့္ steel sets မ်ား ေရြ႕လ်ားျခင္းမွလည္း ကာကြယ္ေပးႏိုင္ကာ ေျမသား၏ အျပင္ဘက္ ပင့္ေထာက္မႈ ျဖစ္လာေစမည္ ျဖစ္သည္။ ေျမသား အားျဖည့္လုပ္ငန္းတြင္ rock bolt အမ်ဳိးအစား သံုးမ်ဳိးရွိသည္။ ၎တို႔မွာ-
  • Mechanically Anchored (rock bolts)
  • Grouted bars (dowels)
  • Friction dowels
Friction dowels မ်ားကို ၎တို႔၏ ၾကာရွည္ခံႏိုင္မႈေပၚ ၾကည့္ၿပီး ယာယီအားျဖည့္လုပ္ငန္းမ်ားတြင္သာ အသံုးျပဳၾကသည္။ အထက္ပါ Rock bolts မ်ားႏွင့္ dowels မ်ား၏ နည္းပညာဆိုင္ရာ အခ်က္အလက္မ်ားကို ဇယားတြင္ ေဖာ္ျပထားသည္။

(၁) တပ္ဆင္ျခင္း။ Rock bolts သို႔မဟုတ္ Dowels မ်ားကို တပ္ဆင္ပါက မည္သည့္ အမ်ဳိးအစားျဖစ္ေစ ေျမသား/ေက်ာက္သားထဲတြင္ ဦးစြာ သတ္မွတ္ထားေသာ အခ်င္းႏွင့္ အလ်ားရွိသည့္ တြင္းမ်ားကို တူးေဖာ္ရမည္ ျဖစ္သည္။ မိုင္းခြဲတူးေဖာ္ေသာနည္းတြင္ မိုင္းခြဲရန္ တြင္းမ်ားတူးေဖာ္သည့္ Jumbo တူးစက္ကို Rock bolt တြင္းမ်ား တူးေဖာ္ရာတြင္ အသံုးျပဳသည္။ Rock bolt တြင္းမ်ား၏ အခ်င္းသည္ အရြယ္အစား အမ်ဳိးမ်ဳိးကြဲျပားႏိုင္သည္။

တူးေဖာ္ရာတြင္ အသံုးျပဳသည့္ drill steel မ်ားႏွင့္ ေက်ာက္အမ်ဳိးအစားေပၚ မူတည္ၿပီး တြင္းမ်ားတူးရာတြင္ ေသြဖယ္မႈ (လြဲေခ်ာ္မႈ) ၁၀ ရာခိုင္ႏႈန္းမွ ၂၀ ရာခိုင္ႏႈန္းအထိ ရွိႏိုင္သည္။ Expansion anchor ဟုေခၚသည့္ သပ္အဖ်ားတြင္ ျဖန္႔ကားႏိုင္ေသာ သပ္မ်ား၊ ကြန္ကရစ္ မႈတ္သြင္းသည့္ Grouted bolt ႏွင့္ Swellex bolt မ်ားတပ္ဆင္ရာတြင္ ေသြဖယ္မႈမွာ အေရးပါေသာ ျပႆနာ တစ္ရပ္မဟုတ္ေသာ္လည္း Split sets မ်ားကဲ့သို႔ တြင္း၏ အက်ယ္(အခ်င္း) တိက်မႈ လိုအပ္သည့္ သပ္မ်ား တပ္ဆင္ရာတြင္မူ တြင္းက်ယ္လာသည္ႏွင့္အမွ် လိုအပ္ေသာ friction resistance ေလ်ာ့နည္းသြားမည္ ျဖစ္၍ တိက်မႈ လုိအပ္သည္။

Mechanically anchored rock bolt မ်ား တပ္ဆင္ရာတြင္မူ တြင္းတူးၿပီးသည္ႏွင့္ သပ္တံကို တြင္းထဲသို႔ တခါတည္း ထည့္သြင္းၿပီး မူလီေခါင္းကို torque wrench ကို အသံုးျပဳၾကပ္ရမည္ ျဖစ္သည္။ ထို႔ေနာက္ ၎သပ္တံအတြင္း tension အားရရွိရန္ direct-pull jack ကို အသံုးျပဳရမည္ ျဖစ္သည္။ torque wrench ကို အသံုးျပဳ၍ မရေပ။ ဘိလပ္ေျမကုိ အသံုးျပဳသည့္ Grouted rock bolt တြင္မူ တြင္းထဲသို႔ သပ္တံကို ထည့္သြင္းၿပီးေနာက္မွ ဘိလပ္ေျမေပ်ာ္ရည္ကို တြင္းထဲသို႔ မႈတ္သြင္းျခင္း ျဖစ္သည္။


(၂) ဆြဲအားထည့္သြင္းျခင္း (tensioning)။ သပ္တံ (anchor) မ်ားကို သမ႐ုိးက်အတိုင္း ဆြဲအား မပါဘဲ တပ္ဆင္ၿပီးမွ torque wrench သို႔မဟုတ္ hydraulic jack မ်ားကို အသံုးျပဳ၍ ဆြဲအားကို ထည့္သြင္းျခင္း ျဖစ္သည္။ သို႔အတြက္ သပ္တံ သို႔မဟုတ္ grouted bolt မ်ားတြင္ လံုေလာက္ေသာ ခံႏိုင္အား ရွိေနရမည္ ျဖစ္သည္။ ေစးပ်စ္ေသာ အရည္တမ်ဳိးမ်ဳိးကို အသံုးျပဳသည့္ grouted bolt မ်ားတြင္ လိုအပ္ေသာ ခံႏိုင္အား (strength) ကို အျမန္ရရွိႏိုင္ၿပီး ဘိလပ္ေျမ အသံုးျပဳေသာ grouted bolt မ်ားတြင္မူ ဘိလပ္ေျမႏွင့္ သပ္တံတို႔ တြဲကပ္အား ရရွိသည္ အထိ ေစာင့္ဆိုင္းရမည္ ျဖစ္သည္။ ထို႔အတြက္ ဘိလပ္ေျမကို အလ်င္အျမန္ခဲေစေသာ accelerator မ်ား အသံုးျပဳၾကသည္။

(၃) ပစၥည္းကိရိယာ။ Rock bolt မ်ားတြင္ ပံုမွန္အားျဖင့္ ပံုမ်ားတြင္ ျပထားသည့္ အတိုင္း ေအာက္ခံအျပားမ်ား ပါရွိၿပီး သပ္တံ အဆံုးတြင္ တပ္ဆင္မည့္ မူလီႏွင့္ ဝါရွာမ်ားလည္း ပါရွိသည္။ ေအာက္ခံျပားသည္ သပ္တံတြင္ ရွိေနေသာ ဆြဲအားကို ခုခံသည့္ တာဝန္ကို ထမ္းေဆာင္ၿပီး တြဲဖက္တပ္ဆင္မည့္ သံဇကာကြက္ႏွင့္ သိုင္းႀကိဳးအစရွိသည္တို႔ကိုပါ ခ်ိတ္တြယ္ေပးထားႏိုင္သည္။ ထို သံဇကာကြက္ႏွင့္ သိုင္းႀကိဳးမ်ားသည္ ဥမင္အတြင္းသား မ်က္ႏွာျပင္ အားျဖည့္ရန္ႏွင့္ ကာကြယ္မႈေပးႏိုင္ရန္ Shotcrete လုပ္ရာတြင္ ျမွဳပ္ႏွံရန္အတြက္ ျဖစ္သည္။ ေအာက္ခံပလိတ္ျပားမ်ားသည္ ေယဘူယ်အားျဖင့္ ေလးေထာင့္၊ အဝိုင္းႏွင့္ ႀတိဂံပံုသ႑ာန္မ်ား ျဖစ္ၾကသည္။ Shotcrete လုပ္ေဆာင္ရျခင္းမွာ ဥမင္မ်က္ႏွာျပင္ႏွင့္ Rock bolt မ်ားအၾကားရွိ ေက်ာက္သား အပိုင္းအစေလးမ်ားအား တြဲကပ္မႈ ရရွိေစရန္ျဖစ္သည္။

(၄) စမ္းသပ္ျခင္း။ Testing rock bolt မ်ားသည္ ေဆာက္လုပ္ေရး လုပ္ငန္းစဥ္တြင္ အေရးႀကီးေသာ အစိတ္အပိုင္း တစ္ရပ္ျဖစ္သည္။ Rock bolt မ်ားကို လံုေလာက္စြာ တပ္ဆင္ထားျခင္း မရွိပါက ၎တို႔သည္ စြမ္းအားျပည့္ လုပ္ေဆာင္ႏိုင္မည္ မဟုတ္ေခ်။ Rock bolt မ်ားတပ္ဆင္ရာတြင္ မွားယြင္းႏိုင္ေသာ အေၾကာင္းရင္းမ်ားမွာ-
  • Rock bolt စနစ္အမ်ဳိးအစား ေရြးခ်ယ္မႈ မွားယြင္းျခင္း၊
  • တြင္းမ်ား ေနရာထားရွိမႈ မွားယြင္းျခင္း၊
  • တြင္း၏ အလ်ား (အရွည္) မွားယြင္းျခင္း၊
  • တြင္း၏ အက်ယ္ (အခ်င္း) မွားယြင္းျခင္း၊
  • တြင္းအား သန္႔ရွင္းမႈ ေကာင္းစြာ မလုပ္ျခင္း၊
  • Grouting ျပဳလုပ္ရာတြင္ လုိအပ္ျခင္း၊
  • Grouting တြဲကပ္မႈ အလ်ားလိုအပ္ျခင္း၊
  • အသံုးျပဳေသာ သပ္တံတြင္ သံေခ်းတက္ျခင္း သို႔မဟုတ္ အနာအဆာရွိေနျခင္း၊
  • မူလီႏွင့္ နတ္မ်ား၊ ေအာက္ခံခံု (bearing plate) မ်ားတပ္ဆင္ရာတြင္ alignment လြဲျခင္း၊
  • Grouting agent မ်ား၏ သက္တမ္းကုန္ဆံုးေနျခင္း၊
  • မသင့္ေတာ္ေသာ Grout mixture မ်ား အသံုးျပဳျခင္း၊
  • Breather tube မ်ား ပ်က္စီးေနျခင္း၊
  • Borehole sealing လုပ္ရာတြင္ လုိအပ္ျခင္း၊
  • သပ္တံ အဆံုးတြင္ တပ္ဆင္သည့္ ပစၥည္းကိရိယာမ်ားတြင္ ေခ်ာဆီလုိအပ္ျခင္း၊
  • တပ္ဆင္ပံု အစီအစဥ္ မွားယြင္းျခင္း၊
  • လံုေလာက္ေသာ စမ္းသပ္မႈ အစီအမံမ်ား မရွိျခင္း၊
  • Rock bolt စနစ္၏ လုပ္ေဆာင္ပံုကို ေစာင့္ၾကပ္ စစ္ေဆးမႈ မရွိျခင္း စသည္တုိ႔ ျဖစ္သည္။
အထက္ပါ ျပႆနာမ်ားကို ထုတ္လုပ္သူမ်ား၏ အညႊန္းမ်ားႏွင့္ စီမံႀကီးၾကပ္မႈမ်ားအတိုင္း ျပဳလုပ္ျခင္းျဖင့္ ေရွာင္ကြင္းႏိုင္သည္။ Rock bolts မ်ားႏွင့္ dowels မ်ားကို စမ္းသပ္ရာတြင္ အသံုးအမ်ားဆံုး နည္းလမ္းမွာ pull-out test ျဖစ္သည္။ Rock bolt ၏အဆံုးတြင္ hydraulic jack ကိုတြဲကပ္ တပ္ဆင္ၿပီး သတ္မွတ္ထားေသာ ဝန္အား သို႔မဟုတ္ အေရြ႕(displacement) ကို သက္ေရာက္ေစေသာ နည္းျဖစ္သည္။ စမ္းသပ္မႈမ်ားကို အမ်ားအားျဖင့္ ဥမင္လုပ္ငန္းစတင္စဥ္တြင္ လုပ္ေဆာင္ေလ့ရွိၿပီး တပ္ဆင္ပံု အစီအစဥ္မ်ား၊ နည္းလမ္းႏွင့္ တပ္ဆင္မည့္သူ၏ ကၽြမ္းက်င္မႈတို႔ တိက်ရန္ လိုအပ္မည္ျဖစ္သည္။ စမ္းသပ္ရာတြင္ ျပႆနာ တစံုတရာေပၚလာပါက ေျပာင္းလဲတပ္ဆင္ရန္ လိုအပ္မည္ျဖစ္ၿပီး စိတ္ခ်ရသည္အထိ ပိုမိုတိက်ေသာ စမ္းသပ္မႈမ်ား ျပဳလုပ္ရမည္ ျဖစ္သည္။

သို႔ေသာ္ Pull-out test ကို dowel ၏ အလ်ားတစ္ခုလံုးကို မလုပ္ဘဲ pull-out test ကိုခံႏိုင္မည့္ အလ်ားအထိအသာ စမ္းသပ္ျပဳလုပ္သည္။ ဥပမာအားျဖင့္ dowel အား pull-out test ျပဳလုပ္မည့္ အလ်ား ပမာဏအထိသာ grouting ျပဳလုပ္ၿပီး စမ္းသပ္ျခင္းျဖစ္သည္။ ထို႔ထက္ ပို၍ ေသခ်ာေသာ စမ္းသပ္နည္းမွာ pull-out test ျပဳလုပ္ထားေသာ dowel အား ျပန္လည္ထုတ္ယူၿပီး စစ္ေဆးနည္းျဖစ္သည္။ သို႔ေသာ ထိုနည္းသည္ ကုန္က်စရိတ္ မ်ားေသာေၾကာင့္ ေျမအေျခအေန မတိက်ေသာအခါတြင္သာ အသံုးျပဳေလ့ရွိသည္။ အျခားေသာ စမ္းသပ္နည္းလမ္းမွာ Mechanically anchored rock bolt မ်ား၏ ခံႏိုင္အား(strength) ကို torque wrench ျဖင့္ စမ္းသပ္ေသာ နည္းလမ္းျဖစ္သည္။ load cells မ်ားကို tensioned rock bolt ၏ အဆံုးတြင္ တပ္ဆင္ၿပီး သပ္တံတေလွ်ာက္ stress မ်ားကို ပို႔လႊတ္ကာ ျပန္လည္ေရာက္ရွိလာေသာ stress wave မ်ားကို ၾကည့္႐ႈစစ္ေဆးျခင္း ျဖစ္သည္။ stress reflection နည္းသည္ႏွင့္အမွ် rock bolt တပ္ဆင္ပံု ေကာင္းမြန္သည္ဟု မွတ္ယူႏိုင္သည္။


Shotcrete အသံုးျပဳျခင္း
Shotcrete ၏ ဘက္စံုအသံုးဝင္ျခင္း၊ ပတ္ဝန္းက်င္ႏွင့္ လိုက္ေလ်ာညီစြာ အသံုးျပဳႏိုင္ျခင္းႏွင့္ ေစ်းသက္သာျခင္းတို႔ေၾကာင့္ ယေန႔ေခတ္ ဥမင္ႏွင့္ တြင္း (shaft) မ်ားတည္ေဆာက္ရာတြင္ တြင္တြင္က်ယ္က်ယ္ အသံုးျပဳေနၿပီျဖစ္သည္။ လတ္တေလာ ေဖာက္လုပ္ထားေသာ ဥမင္ မ်က္ႏွာျပင္မ်ားတြင္ ခ်က္ခ်င္း အသံုးျပဳႏိုင္ျခင္း၊ ဥမင္ႏွင့္ တြင္း(shaft)တို႔ ဆက္စပ္ေနရာမ်ား၊ ဥမင္ခ်ဲ႕ထြင္ေသာ ေနရာမ်ား၊ ဥမင္လမ္းေၾကာင္း အဆက္ေနရာမ်ားတို႔တြင္ တြဲစပ္အေနျဖင့္ အသံုးျပဳႏိုင္ျခင္းႏွင့္ ေျမအေျခအေနကိုလိုက္၍ သင့္ေတာ္ေသာ အေရာအေႏွာ၊ အထူတို႔ကို အမ်ဳိးမ်ဳိးအသံုးျပဳ၍ ရျခင္းတို႔သည္ Shotcrete ၏ အားသာခ်က္မ်ား ျဖစ္သည္။

သို႔ေသာ္ Shotcrete မွာ ပင္ကိုယ္အားျဖင့္ ႂကြပ္ဆက္ေသာ သေဘာရွိေသာေၾကာင့္ ေျမသားပင့္ေထာက္မႈအတြက္ အသံုးျပဳရာတြင္ tension ဒဏ္၊ မာေၾကာမႈႏွင့္ ေပ်ာ့ေပ်ာင္းမႈ (flexibility) ရရွိရန္အတြက္ အားျဖည့္မႈ (reinforcement) မ်ားထည့္သြင္းရန္ လိုအပ္ေပမည္။ သို႔အတြက္ သံဇကာကြက္ သို႔မဟုတ္ ဝါယာဖိုင္ဘာမွ်င္မ်ားကို reinforcement အျဖစ္ တပ္ဆင္ အသံုးျပဳၾကသည္။ ယခုေနာက္ပိုင္းတြင္ steel fiber မ်ားကို ဘိလပ္ေျမ၊ ေက်ာက္တို႔ႏွင့္ ေရာေႏွာ၍ reinforcement အေနျဖင့္ အသံုးျပဳလာၾကသည္။ Steel fiber reinforced shotcrete (SFRS) ကို ၁၉၇၂ ခုႏွစ္မ်ားက ေျမာက္အေမရိကတြင္ ေဖာက္လုပ္ခဲ့ေသာ ဥမင္မ်ားတြင္ ပထမဆံုး အသံုးျပဳခဲ့ၾကသည္။ ထို႔ေနာက္ပိုင္းတြင္ မာေက်ာမႈႏွင့္ ေကြးညႊတ္မႈ ခံႏိုင္အားမ်ား ပိုမိုတိုးတက္ေကာင္းမြန္လာခဲ့ၿပီး shotcrete အလႊာမ်ား၏ ဒဏ္ခံႏိုင္မႈ (fatigue) ႏွင့္ ႐ုိက္ခတ္မႈ ခံႏိုင္အား (impact resistance) မ်ားလည္း ပိုမိုေကာင္းမြန္လာသည္။

ယခုလက္ရွိ Shotcrete ၏ ျဖစ္ေပၚတိုးတက္မႈမ်ားမွာ admixtures မ်ားထည့္သြင္း အသံုးျပဳလာျခင္းျဖစ္သည္။ အထူးသျဖင့္ မိုက္ခ႐ိုဆီလီကာ (microsilica) မ်ား ထည့္သြင္း အသံုးျပဳလာၿပီး ၎သည္ shotcrete ပက္ဖ်န္းစဥ္ ျပန္ကန္လြင့္စင္ထြက္မႈကို ေကာင္းစြာေလွ်ာ့ခ်ေပးၿပီး သိပ္သည္းဆ၊ မာေက်ာမႈအားႏွင့္ ေရလံုမႈ(ေရစိမ့္ဝင္မႈ) တို႔ကို ပိုမိုေကာင္းမြန္လာေစသည္။


(၁) အသံုးျပဳပံုမ်ား။ Shotcrete ကို ဥမင္မ်ားႏွင့္ တြင္း(shaft) မ်ားတူးေဖာ္စတြင္ ကနဦး ေျမသားပင့္ေထာက္မႈ လုပ္ငန္းအျဖစ္ အသံုးျပဳၾကသည္။ တူးေဖာ္ထားေသာ ေက်ာက္သား(ေျမသား) မ်က္ႏွာျပင္ေပၚသို႔ ၂ လက္မမွ ၄ လက္မအထူ ရွိေသာ အလႊာရေအာင္ မႈတ္ဖ်န္းျခင္း ျဖစ္ၿပီး ၎၏ setting time မွာ ထည့္သြင္း အသံုးျပဳထားေသာ accelerator မ်ားေပၚတြင္ မူတည္၍ မိနစ္ အနည္းငယ္မွသည္ နာရီအနည္းငယ္အထိ ၾကာျမင့္တတ္သည္။ မိုင္းေဖာက္ခြဲ၍ တူးေဖာ္ေသာ ဥမင္လုပ္ငန္းမ်ားတြင္ shotcrete ျဖင့္ မညီညာေသာ ဥမင္မ်က္ႏွာျပင္မ်ား၊ ေဖာက္ခြဲရာတြင္ ပိုသြားေသာ ေနရာမ်ားကို ေခ်ာမြတ္ေစျခင္း၊ ျဖည့္သြင္းျခင္းမ်ား ျပဳလုပ္ႏိုင္သည္။ ထို႔ျပင္ မညီညာေသာ မ်က္ႏွာျပင္မ်ားတြင္ ျဖစ္ေပၚေလ့ရွိသည့္ shear ေၾကာင့္ ေျမၿပိဳက်မႈမ်ား၊ အလႊာလိုက္ ေရြ႕လ်ားမႈမ်ား၊ မ်က္ႏွာျပင္ရွိ ေက်ာက္သားမ်ား ပြကာ ဖြာထြက္က်ျခင္းမ်ားကိုလည္း တားဆီးေပးသည္။ ထို႔အတူ ေက်ာက္သား မ်က္ႏွာျပင္တြင္ ရွိေသာ ေရေငြ႔ပါဝင္ႏႈန္းေၾကာင့္ ျဖစ္ေပၚေသာ ေျမသားပြျခင္း၊ က်ဳံ႕ျခင္းမ်ားကိုလည္း တားဆီးေပးသည္။ Shotcrete သည္ ေျမအမ်ဳိးအစား မေကာင္းသည့္ ေနရာမ်ဳိးတြင္ rock bolts (သို႔) dowels မ်ား၊ ရံဖန္ရံခါ steel ribs မ်ား၊ lattice girders မ်ားပါ ေပါင္းစပ္ ထည့္သြင္းအသံုးျပဳရသည့္ SEM ဥမင္ေဖာက္လုပ္နည္းျဖင့္ ေဆာက္လုပ္သည့္ အခါမ်ဳိးတြင္ မရွိမျဖစ္ အသံုးဝင္ေသာ ပစၥည္းျဖစ္သည္။


ေျမသား၏ မာေၾကာမႈ အဆင့္မ်ားအလိုက္ ေျမသားပင့္ေထာက္ျခင္းပံုစံမ်ား

အကိုးအကား
Construction of Tunnel and Shaft. EM 1110-2-2901, 30 May 97, Sec. 5-4. Initial Ground Support.

Related Posts
SEM design ရဲ႕ အဓိက ေသာ့ခ်က္မ်ား
Technology of Tunnel face Stabilization

ဆက္ဖတ္ရန္>>>

USA: EIT (Engineer-In-Training) and FE Exam


U.S မွာ ေရာက္ေနၿပီး အင္ဂ်င္နီယာ အေနနဲ႔ အလုပ္လုပ္ခ်င္ တဲ့ သူေတြ၊ လိုင္စင္ရ Professional Engineer (P.E) ျဖစ္ခ်င္တဲ့ သူေတြအတြက္ ပထမ အဆင့္ လိုအပ္တာ ကေတာ့ EIT (Engineer-In-Training) အလုပ္သင္ အင္ဂ်င္နီယာ ျဖစ္ပါတယ္။
EIT ျဖစ္ၿပီ ဆိုတာ နဲ႔ အလုပ္အကိုင္ အခြင့္အေရး ေတာ္ေတာ္ ပြင့္သြားပါၿပီ။ EIT ျဖစ္ဘို႔ အတြက္ လိုအပ္ခ်က္ေတြကေတာ့
  1. File the Application, Pay the Stated Filing Fee: သက္ဆိုင္ရာ State Licensing Board မွာ က်သင့္တဲ႔ ေလွ်ာက္လႊာေၾကး နဲ႔အတူ Application Form ကို တင္ရမွာ ျဖစ္ပါတယ္။ ဒါမွ FE Exam ကို ေျဖဆိုခြင့္ ရႏိုင္မွာပါ။
  2. သတ္မွတ္ေပးတဲ႔ 8-hour written Fundamentals of Engineering (FE) Examination (၈ - နာရီ ေရးေျဖေမးခြန္း) ကိုေျဖဆို ေအာင္ျမင္ ရမွာ ျဖစ္ပါတယ္။ (အေသးစိတ္ ေနာက္မွာ ဆက္လက္ေဖာ္ျပေပးပါမယ္။)
NCEES Website (http://www.ncees.org/) မွာသြားၿပီး State Licensing boards’ WebSite Links ကိုရယူ ႏိုင္ပါတယ္။ National Council of Examiners for Engineering and Surveying (NCEES) ဆိုတာက ေတာ့ တစ္ႏိုင္ငံ လံုးအတြက္ ဒီေမးခြန္းေတြ ကို ျပင္ဆင္ေပးတဲ့ အဖြဲ႕အစည္း ျဖစ္ပါတယ္။

How to Apply (How to File the Application)
FE Exam ကို ေျဖဆိုခြင့္ ရဘို႔ အတြက္ သက္ဆိုင္ရာ State Licensing Board မွာ Application Form တင္ရမွာ ျဖစ္ပါတယ္။ State တစ္ခုနဲ႔ တစ္ခု လိုအပ္ခ်က္ မတူပါဘူး။ ဒါေၾကာင့္ လိုအပ္ခ်က္ေတြ ကို အရင္စံုစမ္း ထားဘို႔ လိုအပ္ပါတယ္။ အေျခခံ လိုအပ္ခ်က္ ေတြကေတာ့
  1. General အေထြေထြ လုိအပ္ခ်က္ မ်ား။
    1. Citizenship / State Residency : State Board ေပၚ မူတည္ပါတယ္။ တခ်ိဳ႕ State Board ေတြက အေမရိကန္ ႏိုင္ငံသား (သို႕) တရားဝင္ Permanent Residents (Green Card Holders) ျဖစ္ဘို႔လိုအပ္ ေပမဲ႔ တခ်ိဳ႕ State Board ေတြက ေတာ့ အေမရိကန္ ႏိုင္ငံသား ျဖစ္ဘို႔တို႔ State Residency ျဖစ္ဘို႔တို႔ ဆိုတဲ့ လိုအပ္ခ်က္ေတြ မ႐ွိပါဘူး။ ဒါေပမဲ့ social security number (SSN) (သို႔မဟုတ္) individual taxpayer identification number (ITIN) ေတြေပးရဘို႔ ေတာ့ လိုအပ္ေလ့႐ွိပါတယ္။ SSN က US Citizens ေတြနဲ႕ Permanent Residents (Green Card Holders) ေတြမွာ ပဲ ႐ွိတာပါ။ ITIN ကလည္း US မွာတရားဝင္ အလုပ္လုပ္ ၿပီး အခြန္ေပးေဆာင္ ဘူးမွသာ ရႏုိင္တာပါ။ ဒီနံပါတ္ တစ္ခုခု မ႐ွိပဲ ေလွ်ာက္လႊာ တင္ႏိုင္ဘို႔က ေတာ့ မလြယ္ပါဘူး။

  2. Examination Requirements စာေမးပြဲ ဝင္ခြင့္ အတြက္ လုိအပ္ခ်က္ မ်ား။
    1. Graduation: ABET Degree; ABET ဆိုတာက ေတာ့ Accreditation Board for Engineering and Technology ကုိ ဆိုလိုတာျဖစ္ၿပီး Engineering and Technology Curricula ေတြကို US ႏိုင္ငံတစ္ဝွမ္း လံုးက တရားဝင္ အသိအမွတ္ျပဳထား တဲ့ The Nationally Recognized Accrediting Organization တစ္ခုျဖစ္ပါတယ္။ ဒီ ABET accredited engineering program ကို အေမရိက က US နဲ႔ Canada က ေက်ာင္း တစ္ခ်ိဳ႕ မွာပဲရႏိုင္ တာမို႔ အာ႐ွမွာ ဘြဲ႔ရခဲ့ တဲ့ ျမန္မာ အင္ဂ်င္နီယာ ေတြ အေနနဲ႔ ဒီလိုအပ္ခ်က္ ကိုျဖည့္ႏိုင္မွာ ေတာ့ မဟုတ္ပါဘူး။ အခ်ိဳ႕ State Board ေတြကလည္း ABET မဟုတ္တဲ့ ဘြဲ႕ေတြ ကို သူတို႔ အသိအမွတ္ ျပဳထားတဲ့ Evaluator ေတြဆီမွာ Evaluation လုပ္ေပးဘို႔ လိုအပ္တာ လည္း႐ွိပါတယ္။ သက္ဆိုင္ရာ State Board မွာ ေသခ်ာစံုစမ္းပါ။
    2. Engineering Work Experience : State licensing board ေတာ္ေတာ္မ်ားမ်ား က အျခားႏိုင္ငံေတြ ကေန Non-ABET Engineering and Technology Curricula ေတြ နဲ႔ ဘြဲ႕ရခဲ့တဲ့ အင္ဂ်င္နီယာေတြ၊ ဒါမွမဟုတ္ လံုေလာက္တဲ့ engineering work experiences ေတြ႐ွိခဲ့ တဲ့သူေတြ ဆိုရင္ လည္း ေျဖဆိုခြင့္ ေပးတတ္ပါတယ္။
    3. စာရိတၱ ပိုင္း နဲ႔ပတ္သက္ၿပီး လည္း ကန္႔သတ္ခ်က္ အခ်ိဳ႕ ပါဝင္ႏိုင္ပါတယ္။ ဥပမာ
      • be of good moral character အက်င့္ စာရိတၱ ေကာင္းမြန္ရမည္။
      • Never have been convicted of a crime substantially related to the practice of engineering ဒါကေတာ့ Practice of Engineering နဲ႔ ဆက္ႏြယ္တဲ့ ျပစ္မႈ တစ္ခုခု ကို က်ဴးလြန္ခဲ့ဘူးသူ မဟုတ္
      စသည္ျဖင့္ ကန္႔သတ္ထားတာ မ်ိဳးေတြပါ။

  3. Examination Scope
    ေအာက္မွာ ေမးခြန္းပံုစံကို အၾကမ္းျဖင္း ႐ွင္းျပထားပါတယ္။

    Exam Composition
    Session Duration No. of Questions Points Remark
    /EachTotal
    မနက္ပိုင္း Morning Session 4h 120 1 point 120 General: One-Point Multiple Choice Questions
    ညေနပိုင္း Evening Session 4h 60 2 points120 Depth: General, Chemical, Civil, Electrical, Environmental, Mechanical, or Industrial Engineering.
    စုစုေပါင္း 8h - - 240-

    • မနက္ပိုင္းက ေတာ့ EIT candidates အားလံုးေျဖရ မွာ က General ေမးခြန္း ေတြပါ။ ကိုယ္ရတဲ့ ေမးခြန္း ရဲ႕ Serial No. ကိုလိုက္ လို႔ အေမး အေျဖ ကြဲေကာင္း ကြဲႏိုင္ေပ မဲ့ ပါဝင္တဲ့ အေျခခံ ေတြကေတာ့ အတူတူပါပဲ။ ပါဝင္တဲ့ အေၾကာင္းအရာ ေတြကေတာ့
      1. Mathematics
      2. Engineering Probability and Statistics
      3. Chemistry
      4. Computers
      5. Ethics and Business Practices
      6. Engineering Economics
      7. Engineering Mechanics (Statics and Dynamics)
      8. Strength of Materials
      9. Material Properties
      10. Fluid Mechanics
      11. Electricity and Magnetism
      12. Thermodynamics

    • ညေနပိုင္း ေမးခြန္းမွာ ေတာ့ General, Chemical, Civil, Electrical, Environmental, Mechanical, or Industrial Engineering စသည္ျဖင့္ ပါဝင္ ၿပီး ႏွစ္သက္ရာ Section ကို ေ႐ြးခ်ယ္ ေျဖဆို ႏိုင္ပါတယ္။
    • ေမးခြန္းပံုစံ ေတြက အခ်ိန္ နဲ႔ လိုက္ၿပီး အေျပာင္းအလဲ ႐ွိႏိုင္တာ မို႔ FE Exam Specifications လိုအပ္ခ်က္ ေတြကို ေမးခြန္း ထုတ္သူ ျဖစ္တဲ့ NCEES Website (http://www.ncees.org/) မွာသြားၿပီး ေစ့ေစ့စပ္စပ္ ၾကည့္၊ ၿပီးေတာ့ ေသေသခ်ာခ်ာ ျပန္လည္ စစ္ေဆး ပါ။
    • စာေမးပြဲ က closed-book examinations ျဖစ္ၿပီး စာေမးပြဲ ဝင္ခြင့္ အတြက္ လိုအပ္တဲ့ စာ႐ြက္က လြဲလို႔ တျခာ စာအုပ္၊ စာ႐ြက္စာတမ္း သာမက ေရးစရာ ခဲတံေတာင္ မွ မယူရပါဘူး။ ေပတံ တစ္ေခ်ာင္း နဲ႔ သူတို႔ သတ္မွတ္ထားတဲ့ Calculators ေတြေတာ့ ယူလို႔ ရပါတယ္။ စာေမးပြဲ မွာသံုးဘို႔ Mechanical Pencil တစ္ေခ်ာင္း ေပးပါလိမ့္မယ္။ ခဲတံ မေကာင္းရင္ ပဲျဖစ္ျဖစ္၊ ခဲဆန္ ထပ္ လိုအပ္ရင္ ပဲျဖစ္ျဖစ္၊ ထပ္ေတာင္း ႏုိင္ပါတယ္။ Mechanical Pencil ကို မနက္ပိုင္း အၿပီး အခန္းထဲမွာ ပဲထားခဲ့ ရေပမဲ့ ညေနပိုင္း ေျဖၿပီးရင္ အပိုင္ယူသြား ႏိုင္ပါတယ္လို႔ အသိေပးထားပါတယ္။
    • စာေမးပြဲ မွာ သံုးခြင့္ ႐ွိတဲ့ Calculator Brand / Model ေတြကို လည္း ေသခ်ာ သတ္မွတ္ထား ပါတယ္။ ေသေသခ်ာခ်ာ စစ္ေဆးပါ။ Brand ေရာ Model ေရာ ႏွစ္ခုလံုး ကိုက္ညီမွ သာယူခြင့္ ႐ွိပါတယ္။ သတ္မွတ္ခ်က္ ေတြ နဲ႔ ကိုက္ညီတဲ့ အပို Calculator ကိုလည္း ယူသြား ႏိုင္ပါတယ္။
    • မွီျငမ္းစရာ အေနနဲ႔ FE Supplied-Reference Handbook ကိုေပးပါ လိမ့္မယ္။ အဲဒီ စာအုပ္ ေပၚမွာ ေရးျခစ္ မွတ္သားခြင့္ လံုးဝ မ႐ွိပါဘူး။ ေရးျခစ္တာ ကို ေတြ႕သြားခဲ့ရင္ စာေမးပြဲခန္း ထဲက ထုတ္ပစ္ႏိုင္ ေလာက္ေအာင္ အျပစ္ႀကီးတယ္ လို႔ ဆိုပါတယ္။ ဒီစာအုပ္ ကို NCEES Website မွာ Free Download ရယူ ႏိုင္ပါတယ္။
    • လက္႐ွိ ေမးခြန္းေတြ ကေတာ့ Multi-Choice Questions ေတြျဖစ္ၿပီး မွားေျဖမိလို႔ အမွတ္မေလွ်ာ့ တာမို႔ Blank Answer ဗလာ မထားခဲ့ ပါနဲ႔။
    • ညေနပိုင္း ေမးခြန္းမွာ General, Chemical, Civil, Electrical, Environmental, Mechanical, or Industrial Engineering စသည္ျဖင့္ ပါဝင္ ၿပီး ႏွစ္သက္ရာ Section ကို ေ႐ြးခ်ယ္ ေျဖဆို ႏိုင္ပါတယ္ လို႔ ေျပာခဲ့ပါတယ္။ EIT မွာ Discipline သတ္မွတ္ခ်က္ မပါတာမို႔ ဘယ္သူမဆို ႏွစ္သက္ရာ Section ကို ေ႐ြးခ်ယ္ ေျဖဆိုခြင့္ ႐ွိေလ့ ႐ွိပါတယ္။ ဥပမာ ေျပာရရင္ Environmental Engineer က Mechanical ကိုေျဖ ႏိုင္လို႔ ေျဖခဲ့ၿပီး စာေမးပြဲ ေအာင္ရင္ EIT ျဖစ္တာပါပဲ။ PE Exam အတြက္ EIT ျဖစ္ဘို႔သာ လိုအပ္တာမို႔ ဘာမွ ထူးျခားၿပီး အက်ိဳးသက္ေရာက္ မႈ မ႐ွိပါဘူး လို႔ ဆိုပါတယ္။
      ဒါေၾကာင့္ ညေနပိုင္း မွာလည္း General ကိုပဲ ေျဖရင္ စာတစ္မ်ိဳး ထဲပဲ ၾကည့္ရတာ ဘို႔လိုမယ္ လို႔ သူငယ္ခ်င္း တစ္ေယာက္ က က်ေနာ့္ ကို သတိေပး ခဲ့ပါတယ္။ က်ေနာ့္ ကိုယ္တိုင္ ကေတာ့ ညေနပိုင္းကို Mechanical ကိုပဲ ေျဖဘို႕ ျပင္ဆင္ထား ခဲ့တာပါ။ ကိုယ္တိုင္ ကလည္း စာနဲ႔ အဆက္ သိပ္မျပတ္ ေသးတာရယ္၊ Mechanical ကို အားသန္ တာရယ္ ေၾကာင့္ပါ။ ဒါေပမဲ့ Mechanical Section ကို စေျဖၿပီး မိနစ္ ၂၀ ေလာက္ အထိ ၄ ပုဒ္ပဲ ၿပီးလို႔ General Section ကိုသြားၾကည့္ ျမန္မယ္ ထင္တာ နဲ႔ General ကို ေျပာင္းေျဖ ခဲ့ပါတယ္။ မိနစ္ ၂၀ ဆံုး႐ႈံး ခဲ့ေပမဲ့ အခ်ိန္မီ ေအးေအး ေဆးေဆး ပဲ ေျဖႏိုင္ ခဲ့ပါတယ္။ Mechanical ေမးခြန္းတိုင္းက အတြက္အခ်က္ မ်ားလို႔ အခ်ိန္ ပိုၾကာမယ္ လို႔ထင္ပါတယ္။ က်ေနာ့္ အျမင္ ကိုပဲ ေျပာတာပါ။
      ဘယ္ဟာ ကိုေ႐ြး ေျဖသင့္လဲ ဆိုတာေတာ့ ကိုယ့္ဖာသာ ဆံုးျဖတ္ၾကပါ။
    • စာေမးပဲြ လိုအပ္ခ်က္ ေတြက လည္း အေျပာင္းအလဲ ႐ွိႏိုင္ တာမို႔ လိုအပ္ခ်က္ ေတြကို ေမးခြန္း ထုတ္သူ ျဖစ္တဲ့ NCEES Website (http://www.ncees.org/) မွာ ေရာ သက္ဆိုင္ရာ Board ကိုပါ သြားၿပီး ေစ့ေစ့စပ္စပ္ ၾကည့္၊ ၿပီးေတာ့ ေသေသခ်ာခ်ာ ျပန္လည္ စစ္ေဆး ပါ။

  4. Examination Dates
    • Fundamentals of Engineering (FE) စာေမးပြဲကို တစ္ႏွစ္ မွာ ႏွစ္ႀကိမ္ April နဲ႔ October လေတြမွာ က်င္းပေလ့ ႐ွိပါတယ္။
    • သက္ဆိုင္ရာ State Licensing Board Websites မွာ Examination Schedule ေတြကို ထုတ္ျပန္ေႀကညာ ထားေလ့႐ွိ တာမို႔ သြားေရာက္ ၾကည့္႐ႈထားေစ လုိပါတယ္။ Examination Dates (စာေမးပြဲေျဖရမယ့္ေန႔) and Final Filing Dates ေတြကို Examination Schedule မွာေဖာ္ျပ ထားပါတယ္။ Final Filing Dates ကိုသတ္မွတ္တဲ့ အခါ Postmark Date စာတိုက္ က အမွတ္အသား နဲ႔ ရည္ညႊန္းေလ့ ႐ွိပါတယ္။ စာတိုက္ ကေန သြားပို႔ရင္ ပို႔တဲ့ေန႔ ကို ဆိုလိုပါတယ္။ စာေမးပြဲ မေျဖခင္ ၂လ-၃လ ေလာက္ အလိုမွာ Final Filing Dates (Form ပိတ္ရက္) ျဖစ္ေလ့ ႐ွိပါတယ္။
    • Filing လုပ္ၿပီးလို႔ Admission ရခဲ့ရင္ တကယ္ ေျဖရေတာ့ မွာမို႔ ရက္ကိုတြက္ ၿပီး ၾကည့္ရမဲ့ စာကို ႏိုင္နင္းမယ္ ေသခ်ာမွ Filing လုပ္ပါ။
    • Examination Sites / Locations (ဘယ္ေနရာ မွာ က်င္းပမွာလဲ) ဆိုတာ ကိုလည္း State Licensing Board Websites ေတြမွာ ေဖာ္ျပထားတတ္ ပါတယ္။

  5. Filing the Application
    Final Filing Dates အမီ လိုအပ္တဲ့ စာ႐ြက္စာတမ္း ေတြ ကို စာအိပ္ထဲ ေသခ်ာစစ္ေဆး ၿပီးထည့္၊ ၿပီးရင္ State Licensing Board ႐ံုး ကိုလိပ္မူၿပီး Submit လုပ္ရပါမယ္။ စာတိုက္ ကေနပို႔လို႔ ရပါတယ္။
    1. Completed and Signed Application Form: ညႊန္ၾကားခ်က္ အတိုင္း ေသ ေသခ်ာခ်ာ ျပည့္ျပည့္စံုစံု ျဖည့္ၿပီး လက္မွတ္ ထိုးထားတဲ့ Form ျဖစ္ရပါမယ္။ လက္မွတ္က လြဲလုိ႔ အျခားကြက္လပ္ ေတြမွာ Computer Soft Copy မွာပဲ ျဖည့္ ဘို႔ ညႊန္ၾကားခ်က္ ပါခဲ့ရင္ Computer Soft Copy မွာ ျဖည့္ၿပီးမွ Print Out ထုတ္ လက္မွတ္ ထိုးရပါမယ္။ လက္နဲ႔ ျဖည့္တာ ကို လက္ခံမွာ မဟုတ္ ပါဘူး။
    2. the Stated Filing Fee (Check or Money Order Only): ခ်က္လက္မွတ္ (သို႔) မန္နီေအာ္ဒါ ကိုပဲ ထည့္ပါ။ ေငြသား ထည့္ခြင့္ မ႐ွိပါဘူး။
    3. A self addressed, stamped postcard ကိုယ့္ရဲ႕ ရ႐ွိေၾကာင္း သိႏိုင္ဘို႔ စာပို႔ခ တံဆိပ္ေခါင္းကပ္ ၿပီးသား postcard ေပၚမွာ ကိုယ့္လိပ္စာ အသင့္တတ္ၿပီး ထည့္ေပးႏိုင္ပါတယ္။ State Licensing Board ႐ံုးက ရ႐ွိေၾကာင္း တံဆိပ္တံုး ထုၿပီး ျပန္ပို႔ပါလိမ့္မယ္။ ဒါက Admission Notice မဟုတ္ တာကိုေတာ့ သတိျပဳပါ။ (ေနာက္တစ္ဆင့္ စာတိုက္ ကေန Track လုပ္ႏိုင္တဲ့ Registered Mail ကို သံုး ႏိုင္ရင္ ပိုေကာင္းပါတယ္။ ေငြနည္းနည္း ပိုကုန္ေပမဲ့ တန္တယ္လို႔ ထင္ပါတယ္။)

  6. Exam Study Materials
    Recommended Sources ေတြကေတာ့
    1. NCEES Website : Study Material
      1. FE Supplied-Reference Handbook ကို pdf အေနနဲ႔ free view / download လုပ္ႏိုင္သလို စာအုပ္အေန နဲ႔ လိုခ်င္ရင္ လည္း မွာယူ ႏိုင္ပါတယ္။
      2. FE Sample Questions and Solutions ထဲမွာ Recommend ေပးလို တာကေတာ့ FE General Sample Questions and Solutions Book and CD-ROM ပါ။
      3. အျခား Discipline ေတြအတြက္ လိုခ်င္ရင္ လည္း ဝယ္ယူ ႏိုင္ပါတယ္။
      NCEES က ေမးခြန္းေတြ ကို ျပင္ဆင္ေပးတဲ့ အဖြဲ႔အစည္း ျဖစ္တဲ့ အတြက္ တကယ့္ေမးခြန္းေတြ နဲ႔ပိုမို နီးစပ္ပါတယ္။
      Engineering စာအုပ္ေတြ မွာ အမွားေတြ ေတြ႔ရတဲ့ အခါ errata (ျပင္ဆင္ခ်က္)ေတြ ထပ္ျဖည့္ေပး ေလ့႐ွိပါတယ္။ Errata ေတြကို Download လုပ္ၿပီး စာအုပ္ (သို႔) သက္ဆိုင္ ရာစာအုပ္ထဲ မွာ ျပန္လည္ျပင္ဆင္ ၾကည့္႐ႈ ရပါတယ္။

    2. Professional Publications, Inc. (The Power to Pass) Website
      1. FE Review Manual (FERM2) , 2nd Edition, Michael R. Lindeburg, PE , 2006, Paperback, 872 pages, 8 ½ x 11
        ဒီ FE Review Manual စာအုပ္ ကေတာ့ က်ေနာ့္ရဲ႕ Favorite ျဖစ္ပါတယ္။
      2. Fundamentals of Engineering DVD Review (FEDVD), Stephen Andrew, PE , 1999, 12 DVDs, over 20 hours of instruction
      3. Study Materials ေတြကို Packages ေတြအေန နဲ႔လည္း Offer ေပးတတ္ ပါေသးတယ္။ တစ္အုပ္ခ်င္း ဝယ္တာ နဲ႔ စာရင္ ေစ်း အေတာ္အတန္ ပို သက္သာ ပါတယ္။ ဒါ့အျပင္ NCEES က စာအုပ္ေတြ ပါ ဝယ္ယူရ႐ွိ ႏိုင္တာမို႔ Shipping Cost သက္သာ မွာလား ခ်င့္ခ်ိန္ ႏိုင္ပါတယ္။
      4. PPI FE/EIT Review Courses အခ်ိန္ လည္းေပးႏိုင္၊ တတ္လည္း တတ္ႏိုင္ရင္ PPI FE/EIT Review Courses သင္တန္းေတြ သြားတက္ ႏိုင္ပါတယ္။
      5. Online ကေန Practice လုပ္ခ်င္သူေတြ အတြက္လည္း
        • FE/EIT Passing Zone packages ေမးခြန္းေမး၊ ရင္ personal expert responses ကိုရ႐ွိမွာ ျဖစ္ၿပီး လက္႐ွိ အျခားေက်ာင္းသားေတြ ရဲ႕ အေမးအေျဖ ေတြ အျပင္ အရင့္အရင္ ႐ွိႏွင့္ခဲ့တဲ့ အေမးအေျဖေတြ ကိုလည္း ႐ွာေဖြ ႏိုင္ပါတယ္။
        • 30-day / 60-day FE Exam Cafe Access မွာ စာေမးပြဲ ပံုစံ ေမးခြန္းေတြ ကို ေလ့က်င့္ ႏိုင္ပါတယ္။
      6. Calculator ကိုေတာ့ Office Depot လိုေနရာ မ်ိဳးမွာ လြယ္လြယ္ကူကူ ေ႐ြးခ်ယ္ဝယ္ယူ ႏိုင္တာမို႔ Online ကေန ေရာမွာစရာ မလိုပါဘူး။ အပို Calculator ဆိုရင္လည္း Office Depot မွာဆို လြယ္လြယ္ကူကူ Return လည္း လုပ္ႏိုင္မယ္ ေလ။


    3. အျခား ထင္႐ွားတဲ့ Sources ေတြကေတာ့

  7. Admission Notice/Change Of Address
    • Admission Notice ကို စာေမးပြဲ မတိုင္ခင္ ၁ -ပတ္ ေလာက္ မွာ ရ႐ိွပါ လိမ့္မယ္။ ဒီစာ႐ြက္ ပါမွ စာေမးပြဲခန္း ထဲ ဝင္ခြင့္ရ မွာမို႔ ေသေသခ်ာခ်ာ သိမ္းထားပါ။ တကယ္လို႔ အခ်ိန္မီ မရ႐ွိခဲ့ ရင္၊ ေပ်ာက္သြားခဲ့ရင္ စာေမးပြဲ ေျဖရမဲ့ေန႔ မနက္ေစာေစာ Help Desk မွာသြားေရာက္ အကူအညီ ေတာင္းႏိုင္ပါတယ္။
    • မိမိလိပ္စာ ေျပာင္းခဲ့ မယ္ဆိုရင္ ေတာ့ သက္ဆိုင္ရာ Board's address change affidavit ကိုျဖည့္ၿပီး Board ကို အေၾကာင္းၾကားရပါမယ္။

  8. စာေမးပြဲ အတြက္ ယူေဆာင္လာရမဲ့ Photo ID နဲ႔ ပတ္သက္ၿပီး ေတာ့ တိတိက်က် ေဖာ္ျပထားတာ ကိုလည္း ေတြ႔ရပါတယ္။
    • Issued by a state or federal governmental agency (including other U.S. states and foreign countries) အစိုးရ အဖြဲ႔ အစည္း ေတြ ကထုတ္ေပးထားတဲ့ Photo ID (မွတ္ပံုတင္) ျဖစ္ရမယ္။ (ေက်ာင္းသားကဒ္ ေတြ၊ အလုပ္က employee identification cards ေတြျဖစ္လို႔မရပါဘူး)
    • Contains your photograph (မိမိ ရဲ႕ ဓာတ္ပံု ပါဝင္ရမယ္။)
    • Contains your visible signature ျမင္သာ ထင္႐ွားတဲ့ မိမိ ရဲ႕ ထိုးၿမဲ လက္မွတ္ ပါရမယ္။
    • Contains your printed (typed) name (မိမိရဲ႕ နာမည္ကို ေဖာ္ျပထားရမယ္)။
    • ဒီလိုအပ္ခ်က္ ေတြ မျပည့္စံု ရင္ စာေမးခန္း ထဲ လံုးဝ ေပးဝင္မွာ မဟုတ္ ပါဘူး လို႔ဆိုပါတယ္။

  9. Postponements
    • Postponements from the assigned examination: သတ္မွတ္ေပး ထားတဲ့ စာေမးပြဲ ကို ေျဖဆို ဘို႔ ပ်က္ကြက္ တဲ့အခါ ေနာက္ စာေမးပြဲ တစ္ခု ကို ေ႐ႊ႕ဆိုင္း ခြင့္ျပဳ၊ မျပဳ ဆိုတာကို မိမိ တင္ျပတဲ့ ဆင္ေျခ ေပၚ မူတည္ၿပီး Executive Officer က ဆံုးျဖတ္ေပးပါ လိမ့္မယ္။
    • A postponement request ကို verification (အတည္ျပဳ စရာ သက္ေသ အေထာက္အထား ေတြ) နဲ႔ အတူ သတ္မွတ္ထား တဲ့ ရက္ အတြင္း စာေရး (in writing) ေတာင္းဆို ရမွာ ျဖစ္ပါတယ္။
    • နည္းလမ္းတက် မေတာင္းဆိုပဲ စာေမးပြဲ ကို အခ်ိန္မီ ေရာက္လာဘို႔ ပ်က္ကြက္ခဲ့ရင္ ေတာ့ မိမိ ရဲ႕ application ကို cancel အလုပ္ခံရမွာ ျဖစ္ၿပီး သြင္းထားတဲ့ ေလွ်ာက္လႊာေၾကး လည္း ဆံုး႐ႈံး မွာ ျဖစ္ပါတယ္။
    • အက်ိဳးသင့္ အေၾကာင္းသင့္ လက္သင့္ခံႏိုင္ေလာက္ တဲ့ ဆင္ေျခ နမူနာ ေတြ ကေတာ့
      1. The applicant's illness or injury; (requir a certificate or other appropriate document from a medical doctor) မိမိကိုယ္တိုင္ ဖ်ားနာ၊ အနာတရ ျဖစ္ခဲ့ လို႔ (ဆရာဝန္ ရဲ့ ေထာက္ခံခ်က္ (ဒါမွ မဟုတ္) သင့္ေတာ္ တဲ့ စာ႐ြက္စာတမ္း ေတြ နဲ႔ အတူ)
      2. Death or serious illness or injury in the immediate family; (requir a certificate or other appropriate document from a medical doctor): အနီးစပ္ ဆံုး မိသားစုဝင္ တစ္ေယာက္ေယာက္ အႀကီးအက်ယ္ ဖ်ားနာလို႔ (သို႔) ဆံုးပါးသြား လို႔ (ဆရာဝန္ ရဲ့ ေထာက္ခံခ်က္ (ဒါမွ မဟုတ္) သင့္ေတာ္ တဲ့ စာ႐ြက္စာတမ္း ေတြ နဲ႔ အတူ)
      3. Work assignment outside of the continental U.S. (documents from employer) : US ရဲ႕ျပည္ပ တစ္ေနရာ ရာကို အလုပ္ နဲ႔ ေစလႊတ္ ခံရလို႕ (employer ရဲ႕ ေထာက္ခံခ်က္ နဲ႔ အတူ)
      4. Accident or mechanical breakdown on the morning of the examination, (repair provider, or the police) စာေမးပြဲ ေျဖတဲ့ ေန႔ မွာ Accident ျဖစ္လို႔ (သို႔) ကားပ်က္လို႔ (စက္ျပင္ Mechanic (သို႔) ရဲ ၏ စာ႐ြက္စာတမ္း မ်ား)

    • FAILURE TO PREPARE FOR THE EXAMINATION IS NOT A VALID CAUSE : စာေမးပြဲ ကို ေျဖဆို ဘို႔ အဆင္သင့္ မျဖစ္ေသး လို႔ ဆိုတဲ့ ဆင္ေျခ က ေတာ့ လက္သင့္ခံ ႏိုင္ေလာက္တဲ့ အေၾကာင္းတရား မဟုတ္ဘူး လို႔ ဆိုပါတယ္။

ေနာက္ ေရးႏိုင္ဘို႔ အခြင့္အေရး ႀကံဳတဲ့ အခါ စာေမးပြဲ ျပင္ဆင္တဲ့ အေၾကာင္း တင္ျပေပး ပါမယ္။
Web-Links
  1. NCEES (National Council of Examiners for Engineering and Surveying)
  2. ABET: Accreditation Board for Engineering and Technology [ http://abet.org/ ]
  3. PPI2Pass : Professional Publications, Inc. (The Power to Pass) Website[ http:/ppi2pass.com/ ]
  4. Amazon Online Bookshop [ http://www.amazon.com/ ]

ဆက္ဖတ္ရန္>>>

Green Certifications (USGBC's LEED / Singapore GreenMark)


ဒီတစ္ပါတ္ ေတာ့ ကမာၻေပၚ မွာ အသံုးမ်ား တဲ့ LEED® Green Building Rating System အေၾကာင္းကို စာဖတ္သူ နဲ႔ မိတ္ဆက္ ေပးထားပါတယ္။

  1. Introduction
    • Green (High Performance Buildings)
      • Building Industry မွာေတာ့ Sustainable Development Concept ကိုဆိုလိုပါတယ္။
      • Environmentally Responsible (ပတ္ဝန္းက်င္ အေပၚတာဝန္သိေသာ)
      • Economically Profitable (စီးပြားေရး အရ တြက္ေျခ ကိုက္ေသာ)
      • Healthy Places to Live and Work (အလုပ္လုပ္ ရန္ ေနထိုင္ရန္ က်န္းမာေရး အတြက္ သင့္ေလ်ာ္ေသာ)
      • အေဆာက္အအံု ေတြ လို႔ ဆိုပါတယ္။
    • ဘာလို႔ Green လုပ္သင့္လဲ။
      • Building Sector က ပတ္ဝန္းက်င္ အေပၚ အလြန္ အက်ဳိးသက္ေရာက္မႈ ႐ွိလို႔
      • U.S. မွာ စုစုေပါင္း စြမ္းအင္ အသံုးရဲ့ ၃၀% နဲ႔ လွ်ပ္စစ္ အသံုးရဲ့ ၆၀% ကို Building Sector ကေန သံုးပစ္ေနတယ္။
      • တစ္ေန႔ကို ေရဂါလံ သန္း ငါးေထာင္ ေလာက္ အိမ္သာကေန Flush လုပ္ခ် ပစ္ေနတယ္။
      • Commercial Construction Projects ေတြက အမိႈက္ေတြ 2.5lb/ft²-Floor Area ႏႈန္းနဲ႔ စြန္႔ပစ္ေနတယ္။
      • သဘာဝ အတိုင္း အပင္ေတြ တိရစၧာန္ ေတြ ေနထိုင္ စရာေျမ နဲ႔ လယ္ယာ ေျမေတြ ကို ယူသံုးေနတယ္။
    • Green Practices ေတြက ဒီဆိုးက်ိဳး ေတြကုိ ေလွ်ာ့ခ် ႏိုင္႐ံု မက၊ The Trend of Unsustainable Building Activities ေတြ ကို ဘက္ျပန္ ေစပါလိမ့္မယ္။ ဒါေတြ အျပင္
      • လည္ပတ္စရိတ္ ကိုေလ်ာ့က်ေစမယ္။
      • ေစ်းကြက္ ကိုေကာင္းေစမယ္။
      • လုပ္အား ကို တိုးတက္ေစမယ္။
      • အေဆာက္အအံု အတြင္းပိုင္း ေလ မသန္႔ လို႔ ျဖစ္လာ မဲ့ Potential Liability ေတြ ကို ေလွ်ာ့ခ်ေပး ႏိုင္မယ္။
    • Green Performance မွာ ပိုင္႐ွင္ေတြ၊ ႐ွယ္ယာပိုင္႐ွင္ေတြ၊ ေနထိုင္သူ ေတြ နဲ႔ အမ်ားျပည္သူေတြ၊ စတဲ့ သက္ဆိုင္သူ အားလံုး ကို အက်ိဳး႐ွိေစမဲ့ Environmental, Economic နဲ႔ Social Elements ေတြ ပါဝင္ ပါတယ္။

  2. LEED® ဆိုတာ ဘာလဲ။ ?
    • LEED ဆိုတာကေတာ့ The Leadership in Energy and Environmental Design (LEED) Green Building Rating System™ ရဲ့ Acronym (အတိုေကာက္) ျဖစ္ပါတယ္။ အေမရိကန္ ႏိုင္ငံ က ..."> The U.S. Green Building Council (USGBC) က စတင္ စနစ္ခ်မွတ္ လုပ္ေဆာင္ခဲ့ တာျဖစ္ပါတယ္။
    • USGBC ဆိုတာကေတာ့ Sustainable (ပတ္ဝန္းက်င္ ကုိ အေႏွာင့္အယွက္ မေပး မပ်က္စီးေစ ပဲ ေရရွည္ တည္တံ့ ေစမဲ့) အေဆာက္အအံု ေတြ စီးပြားေရး၊ အိမ္၊ ေဆး႐ံု၊ ေက်ာင္း၊ ရပ္ကြက္ ေတြကို Certify လုပ္ေပးတဲ့ non-profit organization တစ္ခုျဖစ္ပါတယ္။ USGBC ဟာ LEED® Rating Systems နဲ႔ တကြ expanding green building practices and education မွာ အဓိက စူးစူးစိုက္စိုက္ လုပ္ေဆာင္ေနတာ ျဖစ္ပါတယ္။
    • LEED® Green Building Rating System က ကိုယ့္ ဆႏၵ နဲ႔ ကိုယ္ ပါဝင္ရတဲ့၊ လူအမ်ား၏ ဆႏၵ ကိုအေျခခံ၊ ႐ွိေနတဲ့ Proven Technologies ေတြကို မူတည္ ထားတဲ့ national rating system တစ္ခုျဖစ္ပါတယ္။
    • Building ရဲ့ Life-Cycle တစ္ေလွ်ာက္ မွာ ရ ႏိုင္မဲ့ Environment Performance ကို Whole Building Perspective ကေန Evaluate (အကဲျဖတ္) ၿပီး Green Buildign လို႔ တိတိက်က် သတ္မွတ္ ႏိုင္မဲ့ စံ ကို ေပးႏိုင္တဲ့ စနစ္ပါ။
    • LEED က ႐ွိေနတဲ့ building types အားလံုး ကို addresses (ရည္ညႊန္း) ၿပီး state-of-the-art strategies (ေနာက္ဆံုးေပၚ နည္းဗ်ဴဟာ ေတြ) နဲ႔ ဧရိယာ ၅ -ခု ကို အထူးအေလးေပး ဂရုစိုက္ ထားပါတယ္။
      1. SS: Sustainable (ေရရွည္ တည္တံ့ ေစမဲ့) site development
      2. WE:Water Efficiency (ေရ ကို အက်ိဳး႐ွိ႐ွိ သံုးေရး၊ ေခၽြတာေရး),
      3. EA:Energy & Atmosphere (စြမ္းအင္ အက်ိဳး႐ွိ႐ွိ အသံုးခ်ႏိုင္ေရး ႏွင့္ ေလထု)
      4. MR:Materials and resources selection (ပစၥည္း၊ သယံဇာတ သံုးစြဲမႈ) , and
      5. EQ: Indoor environmental quality (အေဆာက္အအံု အတြင္း ပတ္ဝန္းက်င္ ေကာင္း) တို႔ျဖစ္ပါတယ္။
      6. ID / IU: New Constructions ေတြအတြက္ ID (Innovation & Design Process) နဲ႔ Existing Buildings ေတြအတြက္ IU (Innovation in Upgrades, Operation and Maintenance ပါဝင္ ၿပီး ဆန္းသစ္တီထြင္မႈေတြ၊ အၾကံေကာင္း ေတြကို ႀကိဳဆို ဘို႔ အတြက္ ထည့္သြင္း ေပးထား တာပါ။
    • LEED က Performance-oriented system ျဖစ္ၿပီး သတ္မွတ္ ထားတဲ့ criteria (လိုအပ္ခ်က္) နဲ႔ ကိုက္ညီ ရင္ points ေတြရပါတယ္။ လိုအပ္ခ်က္ နဲ႔ ကိုက္ညီေၾကာင္း သက္ေသျပ ႏိုင္မဲ့ အခ်က္အလက္ ေတြလည္း တင္ျပရပါတယ္။ လိုအပ္တဲ့ Calculation ေတြ နဲ႔ အတူ သတ္မွတ္ထား တဲ့ Performance Period တစ္ခု အတြင္း မွာ ဆက္တိုက္ (အဆက္မျပတ္) ေကာက္ယူရ႐ွိ တဲ့ Performance Data ေတြကို လည္း ပူးတြဲ တင္ျပရပါမယ္။
    • ရ႐ွိတဲ့ points အရည္အတြက္ ေပၚ မူတည္ ၿပီး ရႏိုင္တဲ့ Green Building Certifications Level ကို ေလးခု ခြဲျခားထားပါတယ္။
      1. Certified
      2. Silver
      3. Gold
      4. Platinum
      ဒီလို Certified Status ရဘို႔ အတြက္ Prerequisite (မ႐ႇိမျဖစ္ေသာလိုအပ္ခ်က္) အားလံုး နဲ႔ လိုအပ္တဲ့ Points အရည္အတြက္ ကို ရ႐ွိ ဘို႔ လိုအပ္ ပါတယ္။
    • Categories တစ္မ်ိဳး နဲ႔ တစ္မ်ိဳး လိုအပ္တဲ့ Points ခ်င္းမတူ ပါဘူး။ ဒါက လည္း မတူတဲ့ Nature ေတြေၾကာင့္ပါ။
      ဥပမာ ျပရ ရင္။
      Rating NC EB
      Certified 26 32 points 32-39 points
      Silver 33 38 points 40-47 points
      Gold 39 51 points 48-63 points
      Platinum 52 69 points 64-85 points
      NC: LEED® for New Construction & Major Renovations
      EB: LEED® Existing Building
    • Scope အေနနဲ႔ ျပည့္စံုျပည့္စံု က်ယ္ျပန္႕က်ယ္ျပန္႕ ႐ွိေပမဲ့ Operation မွာ ႐ိုး႐ွင္းလြယ္ကူ ေအာင္ ဒီ System ကို ဒီဇိုင္း လုပ္ထား တယ္လို႔ ဆိုပါတယ္။
    • LEED က အလ်င္အျမန္ တိုးတက္ေျပာင္းလဲ ေနပါတယ္။ ပတ္ဝန္းက်င္ ထိန္းသိမ္း ဘို႔ လိုအပ္ခ်က္ အသစ္ေတြ သာမက လိုအပ္ခ်က္ အေဟာင္းေတြ ကို လည္း ပိုၿပီးေကာင္းလာေအာင္၊ မြန္းမံရင္း ပိုၿပီးတင္းက်ပ္ တဲ့ လိုအပ္ခ်က္ေတြ အျဖစ္ ေျပာင္းလဲသြား ႏိုင္ပါတယ္။ ဒါေၾကာင့္ လက္ရွိ Current Information နဲ႔ လိုအပ္ခ်က္ ေတြကို USGBC website မွာသြားေရာက္ ေလ့လာဘို႔ တိုက္တြန္းလိုက္ပါတယ္။
    • စာဖတ္သူ ဆက္လက္ ေလ့လာခ်င္ ရင္ေတာ့


  3. LEED Accredited Professionals (LEED APs)
    • LEED AP ဆိုတာကေတာ့ green building techniques, the LEED Green Building Rating System နဲ႔ the certification process ေတြကို ေသခ်ာနားလည္ တယ္လို႔ ျပသ ႏိုင္တဲ့ ပညာ႐ွင္ ကိုေခၚတာ ျဖစ္ပါတယ္။
    • ဒီလို LEED AP ျဖစ္ ဘို႔ကေတာ့ USGBC ရဲ့ အေထာက္အပံ့ နဲ႔ ျဖစ္ေပၚလာတဲ့ Green Building Certification Institute (GBCI) က ႀကီးမႈးက်င္းပတဲ့ သတ္မွတ္ထားတဲ့ စာေမးပြဲ ကို ေျဖဆို ေအာင္ ျမင္ရမွာ ျဖစ္ပါတယ္။
    • LEED Project Team မွာ LEED AP ပါရင္ ID/IU ေအာက္က 1 Point ရပါတယ္။
    • LEED က လူသိမ်ားလာ ၿပီ ဆိုေပမဲ့ လက္႐ွိ အသံုးသိပ္ မတြင္က်ယ္ ေသးတာမို႔ ဒီလက္မွတ္ ရလို႔ အခြင့္အေရး ပိုရမယ္ လို႔ေတာ့ ေျပာလို႔ မရပါဘူး။ တကယ္ လိုအပ္တဲ့ အသံုးခ် မဲ့ သူေတြ အတြက္ ပဲ အက်ိဳး႐ွိ ပါလိမ့္မယ္။ ဒါေပမဲ့ ပတ္ဝန္းက်င္ ထိန္းသိမ္းေရး နဲ႔ အတူ အ႐ွိန္အဟုန္ နဲ႔ ေရပန္းစား လာမဲ့ စနစ္ပါ။
    • ေနာက္ ဒီနည္းပညာ ေတြ က ႏိုင္ငံ ေတာ္ေတာ္ မ်ားမ်ား အတြက္ သင့္ေတာ္ေပမဲ့ စကာၤပူ လို ၿမိ့ဳႏိုင္ငံ အတြက္ ေတာ့ Apply လုပ္ရ အေတာ္ ခက္ပါတယ္။ LEED Certified ျဖစ္ဘို႔ ေတာ့ စိတ္ဝင္ စားေနၾက ပါၿပီ။
    • စာေမးပြဲ က World Wide မို႔ ေနရာေတာ္ေတာ္ မ်ားမ်ား မွာေျဖ ဆိုလို႔ရႏိုင္ပါတယ္။ ကိုယ္ေျဖခ်င္တဲ့ ေနရာ ကို Online ကေန Schedule လုပ္ၾကည့္၊ မရရင္ Test Center ကိုေခၚပါ။ စကၤာပူ မွာေျဖခ်င္ရင္ေတာ့ စကၤာပူ Test Center က မေလး႐ွား Center ေအာက္ က ျဖစ္ၿပီး ေျဖလို႔ ရႏိုင္တယ္ လို႔ေတာ့ ေမွ်ာ္လင့္ရပါတယ္။ စံုစမ္းၾကည့္ေပါ့။
    • စာေမးပြဲ ဝင္ခြင့္ အတြက္ ထူးထူးျခားျခား လိုအပ္ခ်က္ မ႐ွိေပမဲ့ Building industry Knowledge နဲ႔ LEED နဲ႔ ပတ္သက္တဲ့ ဗဟုသုတ တီးမိ ေခါက္မိ ႐ွိဘို႔ ေတာ့ လိုအပ္ပါလိမ့္မယ္။
    • လက္႐ွိ (as of Sep 2008) စာေမးပြဲ ေၾကးကေတာ့ US$400 ျဖစ္ပါတယ္။
    • GBCI Web Site (http://www.gbci.org/) မွာ EXAM REGISTERATION လုပ္ရပါမယ္။
      • ပထမ Log In လုပ္ဘို႔ Account Registration လုပ္ ရပါမယ္။
      • ၿပီးရင္ Log In လုပ္ ေျဖဆို မဲ့ စာေမးပြဲ ကို ေ႐ြးခ်ယ္ ၿပီးရင္ Test Center ေ႐ြးရပါတယ္။ စာေမးပြဲ စစ္ေပးတဲ့ အသင္းကေတာ့ Prometric ျဖစ္ပါတယ္။
      • ပထမ LEED AP Candidate Handbook (PDF) ကို Download လုပ္ယူပါ။
      • စာေမးပြဲ outline of exam content ကို ေလ့လာပါ။ ဒါကုိ ေသေသခ်ာခ်ာ ေလ့လာၿပီးမွ ျပင္ဆင္ပါ။ နမူနာေမးခြန္း ကို လည္း ေသခ်ာၾကည့္ပါ။ (ေသခ်ာေအာင္ ၾကည့္ပါ။)
      • LEED Reference Guideကို ဝယ္ယူပါ။ စာေမးပြဲ နဲ႔ တိုက္႐ိုက္ သက္ဆိုင္ မဲ့ စာအုပ္ တစ္အုပ္ ပဲ လိုအပ္ပါ လိမ့္မယ္။ (ဥပမာ New Construction ဆို LEED NC Handbook, Existing Builidng ဆို LEED EB Handbook) Version ေရာ Validity ေရာ ေသခ်ာစစ္ပါ။ LEED EB ဆို ခု Sep 30, 2008 မွာ စာေမးပြဲ Register ပိတ္မွာ ျဖစ္ၿပီး Dec 2008 အတြင္း အၿပီး ေျဖရပါလိမ့္မယ္။
      • တတ္ႏိုင္ရင္ optional USGBC courseကို တက္ေရာက္ သင္ယူ ႏို္င္ပါတယ္။
      • Professional Publications Inc. (ppi2pass.com) ကေနလည္း ေလ့က်င့္ခန္း စာအုပ္ နဲ႔ Flash Card ေတြ နဲ႔ အျခား Resources ေတြ ရႏိုင္ပါတယ္။

    • 2009 နဲ႔ ေနာက္ပိုင္း မွာေတာ့ စာေမးပြဲ ပုံစံ ေရာ၊ Content ေတြ ကိုပါ ေျပာင္းလဲမႈ ေတာ္ေတာ္မ်ားမ်ား လုပ္ပါလိမ့္မယ္။ သတိထားပါ။ GBCI Website မွာ ေသခ်ာ ေလ့လာၿပီးမွ ျပင္ဆင္ပါ။

    • Exam Registeratioin ၿပီးသြား လုိ႔ ေလ့လာဘို႔ လိုအပ္တဲ့ အခါ ဒီ စာမ်က္ႏွာ ေတြက အသံုးတဲ့ ပါလိမ့္မယ္။


  4. စကာၤပူ GreenMark
    • LEED နဲ႔ တိုက္႐ိုက္ မသက္ဆိုင္ ေပမဲ့ စကာၤပူ မွာေတာ့ သူ႔ ကိုယ္ပိုင္ GreenMark Program ႐ွိပါတယ္။ သူကေတာ့ Criteria (စံညြန္း သတ္မွတ္ခ်က္) ငါးခု ခြဲ ထားပါတယ္။
      1. Energy Efficiency
      2. Water Efficiency
      3. Site/Project Development & Management (Building Management & Operation for existing buildings)
      4. Good Indoor Environmental Quality & Environmental Protection
      5. Innovation
    • သူ႔မွာ လည္း Certified Green Mark Manager (GMM) & Green Mark Professional (GMP) လို႔ေခၚတဲ့ Program ႐ွိပါတယ္။
    • ေနာက္ ထူးျခားခ်က္ ကေတာ့ Enhanced Green Mark Incentive Scheme (GMIS) ဆိုတာ ႐ွိတာပါ။ ဘာ ရရင္ ဘယ္ေလာက္ ဆုေပး မယ္ ဆိုတဲ့ မက္လံုး ေပးထား တာပါ။ တကယ္ လည္း မက္ေလာက္ ေအာင္ ကိုေပး ထားတာပါ။
    • LEED ကေတာ့ Platinum ရမွပဲ Certified Fee ကိုပဲေလွ်ာ့ေပးမွာ ပါ။ Registered Fee , Expedited Fee ေတြ က ေပးရအံုး မွာပါ။
    • HVAC Engineer ေတြအတြက္ Green Building Design Guide- Air-conditioned Buildings ကိုလည္းဖတ္႐ႈႏိုင္ပါတယ္။
    • အေသးစိတ္ သိခ်င္ရင္ ေတာ့ BCA Green Mark Website မွာသြားေရာက္ ေလ့လာ ႏိုင္ပါတယ္။


Web-Links
  1. The U.S. Green Building Council (USGBC)[ http://www.usgbc.org/ ]
  2. GBCI: Green Building Certification Institute[ http://www.gbci.org/ ]
  3. Prometric Test Center[ http://www.prometric.com/GBCI/default.htm ]
  4. Professional Publications Inc. (ppi2pass.com)
    [ http://ppi2pass.com/ppi/PPIShop_ct_LEED ]

  5. Building & Construction Authority, Singapore

ဆက္ဖတ္ရန္>>>

Automatic Control Systems in Buildings


  • မ်က္ေမွာက္ေခတ္ Buildings ေတြ မွာ Equipments ေတြ က အမ်ားႀကီး မို႔ ဒီ Equipments ေတြ ကို ထိန္းသိမ္း ေမာင္းႏွင္ တဲ့ အခါ operator ေတြ အမ်ားႀကီး နဲ႔ manually operate လုပ္တာ က efficient မျဖစ္၊ မထိေရာက္ေတာ့ ပါဘူး။
  • ဒါေၾကာင့္ အလိုအေလ်ာက္ ထိန္းသိမ္း အလုပ္လုပ္ ေဆာင္ႏိုင္မဲ့ Automatic Control ေတြ က အေရးပါ လာပါတယ္။ အထူးသျဖင့္ Dynamic Response လိုအပ္တဲ့ အခါ အလိုလို တြက္ခ်က္ ထိန္းခ်ဳပ္ေပးႏိုင္တဲ့ Automatic Control Systems ေတြ က ပိုမိုထိေရာက္ စြာ စြမ္းေဆာင္ ေပးႏိုင္ပါတယ္။



  1. Introduction
    • Building Owner ရဲ့ Operation လိုအပ္ခ်က္ နဲ႔ တတ္ႏိုင္တဲ့ ေငြေၾကး Budget ကို လိုက္လို႔ ရိုးရိုးရွင္းရွင္း Simple Stand-alone Control ကေန Integrated Control Systems အမ်ိဳးမ်ိဳး ျဖစ္ႏိုင္ပါတယ္။
    • ဒီလို Control Systems ေတြ ကို သံုးစြဲမႈ အတိမ္အနက္ ကို လိုက္ၿပီး အေခၚအေဝၚ အမ်ိဳးမ်ိဳး ျဖစ္ႏိုင္ပါတယ္။
      • Automatic Control System
      • Home Automation System
      • Building Automation System (BAS)
      • Building Management System (BMS)
      • Energy Monitoring and Control System (EMCS)
      • Energy Management System (EMS)
      • Facility Management System (FMS)

    • ရိုးရွင္းတဲ့ Control Systems ဥပမာ ေတြ ကေတာ့။
      • Domestic Water Transfer Pump Control
        • အမိုးေပၚ ကေရကန္ထဲမွာ ေရမရွိရင္ ေမာင္းတင္၊ ေရျပည့္ရင္ အလိုလိုရပ္၊
        • ေရကန္ထဲမွာ ေရနည္းရင္ (သို႔) ေရလွ်ံ ေနရင္ အခ်က္ေပး (Alarm)
        • ေရပန္႔တစ္ခု အလုပ္မလုပ္ရင္ ေနာက္တစ္ခု အလိုလို အစားဝင္၊
        • သာမန္ အေျခအေန မွာ မီတာခ သက္သာ တဲ့ ညအခ်ိန္ Timer ေပးထားၿပီး ေရမျပည့္မခ်င္း ေမာင္းတင္တာ၊ ျပည့္သြားရင္ အလိုလို ရပ္
      • Drainage Sump Pump Control
        • ေရဆိုးကန္၊ မိုးေရကန္ ေရျပည့္ရည္ အလိုလို ေမာင္းထုတ္။
        • ေရလွ်ံ ေနရင္ အခ်က္ေပး
      • Fire Pump Control
        • အေရးေပၚ မီးအေျခအေန မွာ မီးသတ္ေရပန္႔ အလိုလို ေမာင္း။
        • မီးလွန္႔ Fire Alarm Activate လုပ္။

    • ဒီလို Control မ်ိဳးက Central BAS နဲ႔ မတြဲပဲလည္း Control Panel ကေန တိုက္ရိုက္ ထိန္းလို႔ ရပါတယ္။ Central BAS နဲ႔ တြဲခ်င္ရင္ေတာ့ Controller နဲ႔ Contact Point ေပးရပါလိမ့္မယ္။
    • HVAC လို Environment Control လုပ္ဘို႔ လိုအပ္လာတဲ့ အခါ မွာ ေတာ့ ရိုးရိုးရွင္းရွင္း ကေန ပိုမို ရႈတ္ေထြး သိမ္ေမြ႕ တဲ့ Control System ေတြ လိုအပ္လာပါတယ္။
    • Building MEP Services ေတြျဖစ္ၾကတဲ့ HVAC Systems, Plumbing Systems, Fire Protection and Life Safety Systems, Lighting, Power နဲ႔ Security System ေတြ ကို controls and monitors လုပ္ႏိုင္မဲ့ computer-based control system ေတြ ကို BAS (သို႔) BMS လို႔ ေခၚဆိုေလ့ ရွိၾကပါတယ္။
    • အေရးေပၚ အေျခအေန မွာ သူ႔အလိုလို အလုပ္လုပ္တာ၊ တာဝန္ရွိတဲ့ သူေတြ ဆီ SMS (သို႔) email ပို႔ အေၾကာင္းၾကား တာ၊ အေရးေပၚ ေၾကျငာခ်က္ေတြ ကို ႀကိဳတင္ အသံသြင္းထားတဲ့ အတိုင္း ထုတ္လႊင့္တာေတြ ပါ ထည္႔သြင္းေပးႏိုင္ ပါေသးတယ္။
    • တင္းက်ပ္တဲ့ Stringent Environment Control Conditions နဲ႔ Utilities Systems ေတြ အမ်ားႀကီး ပါဝင္တဲ့ Electronic / Pharmaceutical Factories ေတြ မွာေတာ့ ဒီ Building Control Systems က အဆေပါင္း မ်ားစြာ ပိုမိုသိမ္ေမြ႕၊ ပိုမို ရႈတ္ေထြး တာမို႔ Facility Management System (FMS) လို႔ ေခၚဆို ၾကပါတယ္။
    • စာေရးသူ ပါဝင္ေဆာက္လုပ္ခဲ့ ဘူးတဲ့ Electronic Factory တစ္ခုက ပထမဆံုး Phase 1 မွာ Cleanroom အတြက္ ULPA Filter တပ္ဆင္ထားတဲ့ FFU (Fan Filter Units) အလံုး 3,600 တပ္ဆင္ ရပါတယ္။ တစ္လံုးစီ က လိုအပ္ခ်က္ အတိုင္း Air Flow Velocity ရေစဘို႔ တစ္ခုခ်င္း Speed (rpm) ညွိေပးရပါတယ္။ ဒါကို အစမွာ manually setup လုပ္လို႔ ရေပမဲ့ တကယ္တန္း operate လုပ္တဲ့ အခါမွာ FMS မပါရင္ ဘယ္လို မွ ခရီးတြင္မွာ မဟုတ္ပါဘူး။
    • ဒီ FMS လိုပဲ သိမ္ေမြ႕နက္နဲ ႏိုင္တဲ့ Industrial Control / Automation Systems ေတြနဲ႔ Process Control Systems ေတြလည္း ရွိပါေသးတယ္။ ( စာေရးသူ မွာ ဒီ အျခား Control Systems နဲ႔ပတ္သက္ၿပီး NUS မွာ MSc. တက္တုန္းက စာေတြ႔ သင္ယူ ေလ့လာခဲ့ ဘူးေပမဲ့ အေတြ႕အၾကံဳ ေတာ့ မရွိေသးပါဘူး။ )


    - Back to Top -

  2. BAS Points Schedule and Control Strategies
    • Building Engineer ေတြ သိထားသင့္တဲ့ BAS အေျခခံ ေတြ ကေတာ့
      1. BAS Points Schedule
        • Input / Output
        • Digital / Analog
      2. Control Strategies (Control / Monitor / Alarms)


    1. BAS Points Schedule
      • အေျခခံ အေနနဲ႔ ေျပာေလ ့ရွိတာက BAS Points Schedule ပါ။ DI (Digital Input), DO (Digital Output), AI (Analog Input), AO (Analog Output) စသည္ျဖင့္ ေတြ႕ႏိုင္ပါတယ္။ ရခ်င္တဲ့ Control Strategies ကို လိုက္ၿပီး လိုအပ္တဲ့ points အေရအတြက္ ကို သတ္မွတ္ရပါတယ္။

      • Input or Output : Control Terminal Box ဘက္ ကေန ၾကည့္ ၿပီး အဝင္အထြက္ ကို ေခၚတာပါ။
        • Output: Control System ကေန Equipment ဆီကို ထြက္ရင္ Output, ဒါကို Command Signal လို႔ ေခၚႏိုင္ပါတယ္။
        • Input: Equipment / Instruments ထဲကေန Control System ထဲကို ဝင္လာရင္ Input ပါ။ ဒါကို Status Signal လို႔ ေခၚႏိုင္ပါတယ္။

      • Digital (Binary) or Analog :
        • Digital : Two Position (either 0 or 1) 0 နဲ႔ 1 တစ္ခုခု ပဲ ျဖစ္ႏိုင္တာ မို႔ Digital လို႔ ေခၚတာပါ။ တစ္ခါတစ္ရံ Binary လို႔လည္း ေခၚတတ္ၾကပါေသးတယ္။
        • Angalog : Any Position (from 0 to 1), 0 ကေန 100% အတြင္း Any Value ကို သတ္မွတ္ ႏိုင္တာမို႔ Analog လို႔ ေခၚတာပါ။

      • DO (Digital Output) : Equipment တစ္ခုခု ကို စဘို႔၊ ရပ္ဘို႔ (သို႔) Actuator တစ္ခုခု ကို အဖြင့္အပိတ္ (အျပည့္ဖြင့္၊ အျပည့္ပိတ္) လုပ္ခိုင္း ႏိုင္တဲ့ Command Signal ပါ။
        • On / Off (Sometimes called Start / Stop) : Equipments
        • Open / Close [ Fully Open / Fully Close ] : Motorized Actuators, Valve, Dampers

      • AO (Analog Output) : Equipment တစ္ခုခု ရဲ့ လည္ပတ္ႏႈန္း (rpm) ကိုထိန္းဘို႔၊ (သို႔) Actuator တစ္ခုခု ကို (အျပည့္ဖြင့္၊ အျပည့္ပိတ္ တင္ မဟုတ္ပဲ) လိုခ်င္တဲ့ ေနရာ အလိုက္ အဖြင့္အပိတ္ Modulating လုပ္ခိုင္း ႏိုင္တဲ့ Command Signal ပါ။
        • Modulating Control : Motorized Actuators, Valve, Dampers
        • Speed Control : Variable-Frequency Drive(VFD) [ VFDs are also know as Adjustable-Frequency Drives (AFD), Variable-Speed Drives (VSD), AC drives, Microdrives or Inverter drives.]
        • Capacity Control : Thermistor Controlled Electric Heater

      • DI (Digital Input) : ျဖစ္ႏိုင္ေခ် ရွိတဲ့ Condition ႏွစ္ခု အနက္ က ဘယ္တစ္ခု ျဖစ္ေနသလဲ ဆိုတဲ့ Status ကို Feedback ေပးလာတဲ့ Status Signal Point ပါ။ သိခ်င္တဲ့ Equipment တစ္ခု လည္ေနလား ၊ ရပ္ေနလား၊ ဒါမွမဟုတ္ မလည္ႏိုင္ပဲ Trip ျဖစ္ေနသလား။ Actuator က ပြင့္ေနသလား၊ ပိတ္ေနသလား။ Differential Sensor (Pressure, etc.) တစ္ခုခု လိုတဲ့ အေနအထား ရၿပီလား၊ Control Panel က Auto Mode စတဲ့ အေျခအေန ေတြ ကို ေပးတာပါ။
        • On / Off Status : Equipments, Differential Pressure Switch, etc.
        • Open / Close Status : Motorized Actuators, Valve, Dampers
        • Trip Status : Equipments
        • Operating Mode : Auto/Off/Manual Switch Modes, Local / BAS Control Mode, etc.
        • Water Level: Water Tank High Level, Low Level (Pump Stop), Pump Start Level, etc.
        • Alarm: Fault Alarm, System High Pressure, Low Pressure, Water Tank Extra High Level (Overflow), Extra Low Level (Empty), etc.
        • Pulse Input: Water Meter / Gas Meter / BTU meter, etc.

      • AI (Analog Input ) : သိခ်င္တဲ့ အေျခအေန Status Signal ေတြ ကို Sensor / Transmitter / transducer ေတြကေန ယူတာပါ။ ဒီ Input ေတြ က ရတဲ့ အေျခအေန တန္ဘိုး ေတြ ကို မူတည္ ၿပီး ဘယ္လို Control လုပ္မယ္ ဆိုတဲ့ Control Strategies ေတြ ကို သတ္မွတ္ရပါတယ္။ ဥပမာ ေတြ ကေတာ့။
        • Temperature : Space, Supply / Return Air, Chilled Water, Hot Water, etc.
        • Humidity : Room, Supply Air
        • Pressure : Air System, Water Systems, Compressed Gas, etc.
        • Differential Pressure : Air System, Water Systems, etc.
        • Flowrate : Air System, Water Systems, etc.
        • Ampere : Equipment Power Usage
        • Speed : Variable-Frequency Drive (VFD), etc.
        • Lighting Illuminance Level (lux)
        • Indoor Air Quality Sensors : CO Sensors, CO2 Sensors, etc.
        • PH : Industrial Discharged Water, Industrial Exhausts, etc.

      • Analog Input ထဲမွာ Voltage, Current, Thermistor (Resistance) ဆိုၿပီး Input သံုးခု ရွိတဲ့ အနက္ အခ်ိဳ႕ Controllers ေတြမွာ Thermistor Inputs, TI ကို သီးသန္႔ခြဲ သတ္မွတ္ တာလည္း ရွိပါတယ္။ Thermistor Input ေတြက အမ်ားအားျဖင့္ Temperature ျဖစ္ေလ့ရွိပါတယ္။ (A thermistor is a type of resistor whose resistance varies with temperature.) အခ်ိဳ႕ Controllers ေတြကေတာ့ Analog Input တစ္မ်ိဳးမ်ိဳးသာ မက Digital Input ကိုပါ လက္ခံ ႏိုင္တဲ့ Universal Inputs, UI ဆိုၿပီးလည္း ေပးတတ္ပါတယ္။ Point Schedule မွာေတာ့ ဒါေတြ ကို ( ေဖာ္ျပဘို႔မလိုအပ္တာမို႔ ) ေဖာ္ျပေလ့ မရွိပါဘူး။

      • HL (High Level Interface) : Chillers ေတြ လို တကယ့္ Advanced Control System ပါၿပီးသား Equipments ေတြ ကေတာ့ HL (High Level Interface) နဲ႔ တိုက္ရိုက္ Communicate လုပ္ႏိုင္ပါတယ္။ သတိထား ရမွာ က Communication Protocol နဲ႔ Network Cabling Standard ပါပဲ။


    2. Control Strategies
      • Building Owner ေတြနဲ႔ Operator ေတြက စိတ္ခ်ၿပီး လြယ္လြယ္ကူကူ သံုးစြဲ ထိန္းသိမ္း ႏိုင္မဲ့ Control Systems ေတြကို ပဲ လိုခ်င္ပါတယ္။ ဒါေၾကာင့္ designer က Control System အတြက္ လိုအပ္တဲ့ အခ်က္အလက္ ေတြ ကို ေပးရပါမယ္။ အဲဒါေတြကေတာ့
        • Control Sequence of Operation
        • A Control Schematics
        • Diagram showing interaction between various parts of the system
        • Commissioning Instruction
        • A maintenance checklist

      • Building Owner က ဘယ္အဆင့္အထိ Control (သို႕) Monitor လိုခ်င္တာလဲ။ Allowable Tolerance ဘယ္ေလာက္ အတိုင္းအတာအတြင္း တိတိက်က် ရခ်င္တာလဲ ဆိုတာေတြ ေပၚမူတည္ၿပီး စဥ္းစားရပါတယ္။ စဥ္းစားရမဲ့ အဆင့္ေတြ ကေတာ့၊
        • Simple Monitoring
        • Space Environmental Control (Temperature, Humidity, Pressure, Cleanliness, etc.)
        • Scheduled (Timer) Control
        • Data Acquisition
        • Equipment Performance Control, Sequencing, Loading
        • Energy Usage Monitor and Optimization
        • Control Optimization: Static or Dynamics

      • Local Loop (or) Supervisory Control ?
        • Lower Level Local-Loop Control ဆိုတာက သိပ္ၿပီး ရႈတ္ရႈတ္ေထြးေထြး မရွိလွတဲ့ Domestic Water Pumps, Drainage Pumps, Room FCU ေတြ ကို အမ်ားအားျဖင့္ Lower Level Local-Loop Control နဲ႔ ထိန္းႏိုင္ပါတယ္။ Single Set point ထားၿပီး actuator နဲ႔ ပဲ အတိုးအေလွ်ာ့ လုပ္ေပးၿပီး ထိန္းတာပါ။ (ဥပမာ။ ။ Chilled Water FCU ရဲ့ Supply Air Temperature ကို ထိန္းဘို႔ Chilled Water Control Motorized Valve ကို လိုအပ္သလို အဖြင့္အပိတ္ လုပ္ေပးခိုင္းတာ မ်ိဳးပါ။)
        • Upper Control Level ျဖစ္တဲ့ Supervisory (or Remote) Control ကေတာ့ လိုအပ္သလို set points ေျပာင္းတာ၊ အခ်ိန္အလိုက္ အလုပ္လုပ္ေစမဲ့ time-dependent modes of operation ထားတာ, Control Optimization လုပ္တာ နဲ႔ Data Acquisition လို႔ေခၚတဲ့ အခ်က္အလက္ ေတြ စုေဆာင္း တာေတြ ကို ပါရႏိုင္ပါတယ္။

      • Control (and/or) Monitor ?
        • Control (and/or) Monitor ဘယ္လို လုပ္ခ်င္တာလဲ။
        • Remote On/Off Control လိုအပ္သလား၊ လိုအပ္ရင္ On/Off နဲ႕တင္ လံုေလာက္သလား၊ ဒါမွမဟုတ္ ဘယ္ေလာက္ အဆင့္အထိ ထိန္းခ်ဳပ္ဘို႔ လိုအပ္သလဲ။ ဒီလို Control လုပ္ဘို႔ အနည္းဆံုး ဘယ္ Data ေတြ လိုအပ္သလဲ။ ေနာက္ထပ္ ဘယ္ Data ေတြ ကို လိုခ်င္ေသးလဲ။
        • Monitor ဆိုရင္လည္း အနည္းဆံုး ဘယ္ Data ေတြ ကို လိုခ်င္တာလဲ။ ဘာ Status ေတြ ကို Monitor လုပ္ခ်င္တာလဲ။ In Operation လည္ေန မေန (On/Off Status) ကိုသိခ်င္သလား။ အျခားဘယ္ Operating parameter ေတြရဲ့ အေျခအေန ကိုသိခ်င္သလဲ။ Alarm ဆိုရင္ Specific လား ဒါမွမဟုတ္ General လား။ (ဥပမာ။ ။ Water Pumps အတြက္ Water Tank Empty, Water Tank Overflow, Pump Trip, No Flow တစ္ခုခ်င္းစီ ကို BAS ကေန သိခ်င္သလား၊ ဒါဆိုရင္ 4 points လိုမယ္။ ဒါမွမဟုတ္ ဒီေလးခုထဲ က ဘယ္ Alarm ပဲျဖစ္ျဖစ္ General Alarm ကို Trigger လုပ္ေပးမယ္ ဆိုရင္ေတာ့ 1 point ပဲလိုမယ္ စသည္ျဖင့္ပါ။)

      • Control Optimization:
        • Control Optimization လိုခ်င္သလား။ လိုခ်င္ရင္ Static Optimization နဲ႔ Dynamic Optimization ႏွစ္ခုထဲက ဘယ္အမ်ိဳးအစား ကို လိုခ်င္တာလဲ။

      • စသည္ျဖင့္ လားေပါင္း၊ လဲေပါင္း မ်ားစြာ ကို အေျဖရွာရပါတယ္။
      • ဒီအေျခခံ ေတြ ကို ရၿပီဆိုရင္ေတာ့ ပိုၿပီး အေသးစိတ္ သတ္မွတ္ဘို႔ အမ်ားအားျဖင့္ BAS specialist နဲ႔ လည္း ေသေသခ်ာခ်ာ ေဆြးေႏြး ညွိႏိႈင္း ရပါတယ္။
      • Energy Efficiency လိုခ်င္လို႔ Optimization လုပ္တဲ့ အခါ Sensor ေတြ Controller ေတြ အမ်ားႀကီး ထပ္တတ္ ရတတ္ပါတယ္။ တစ္ခါတစ္ရံ ေပါ့ေစခ်င္လို႔ ေၾကာင္ေဆးထိုး၊ ေဆးအတြက္ေလး ဆိုတာ လို ေငြလည္းပိုကုန္၊ Energy ပိုစား တာလည္း ျဖစ္တတ္ ပါေသးတယ္။


    - Back to Top -

  3. Control Fundamentals
    1. Terminology
    2. Feedback-Control Example
    3. Type of Control Action
    4. Control Components
      1. Controlled Devices
      2. Sensors
      3. Controllers

    5. Communication Networks for BAS
    6. Specifying DDC System




    1. Terminology
      Control Systems မွာသံုးတဲ့ Terminology အခ်ိဳ႕ ကို ASHRAE Handbook ကေန ေကာက္ႏုတ္ ေဖာ္ျပ ေပးထားပါတယ္။
      • A closed loop or feedback control measures actual changes in the controlled variable and actuates the controlled device to bring about a change. The corrective action may continue until the variable is brought to a desired value within the design limitations of the controller. Every closed loop must contain a sensor, a controller, and a controlled device.
      • The sensor measures the controlled variable and transmits to the controller a signal (pneumatic, electric, or electronic) having a pressure, voltage, or current value related by a known function to the value of the variable being measured.
      • The controller compares this value (the sensor's signal) with the desired set point and regulates an output signals to the controlled device for corrective action. A controller can be hardware or software. A hardware controller is an analog device (e.g., thermostat, humidistat, pressure control) that continuously receives and acts on data. A software controller is a digital device (e.g., digital algorithm) that receives and acts on data on a sample-rate basis.
      • The controlled device is typically a valve, damper, heating element, or variable-speed drive. It is the component of a control loop used to vary the input (controlled variable).
      • The set point is the desired value of the controlled variable. The controller seeks to maintain this set point. The controlled device reacts to signals from the controller to vary the control agent.
      • The control agent is the medium manipulated by the controlled device. It may be air or gas flowing through a damper; gas, steam, or water flowing through a valve; or an electric current.
      • The process is the HVAC apparatus being controlled, such as a coil, fan, or humidifier. It reacts to the control agents output and effects the change in the controlled variable.
      • The controlled variable is the temperature, humidity, pressure, or other condition being controlled.



    2. Feedback-Control Example
      • Closed Loop Or Feedback Control တိုင္းမွာ sensor, controller နဲ႔ controlled device ဆိုတဲ့ Basic Elements သံုးခု က မရွိမျဖစ္ ပါဝင္ရပါတယ္။ နမူနာ တစ္ခု အေနနဲ႔ ရိုးရိုးရွင္းရွင္း Simple Heating Coil Control ကို ေအာက္မွာ ေဖာ္ျပ ေပးထားပါတယ္။


      • ပထမ Sensor က Controlled Variable ကို Sense လုပ္ပါတယ္။ ဒီနမူနာ မွာ Controlled Variable က Duct ထဲက ေလရဲ့ အပူခ်ိန္ Air Temperature ျဖစ္ပါတယ္။
      • Controller က ဒီ Measured Value ကို လိုခ်င္တဲ့ (ခ်ိန္ထားတဲ့) Setpoint နဲ႔ ႏိႈင္းယွဥ္ၾကည့္ပါတယ္။ ဒီ နမူနာ မွာ ဆိုရင္ Measured Temperature ကို လိုခ်င္တဲ့ (ခ်ိန္ထားတဲ့) Setpoint Temperature နဲ႔ ႏိႈင္းယွဥ္ၾကည့္ပါတယ္။
      • ဒီ Setpoint နဲ႔ တိုင္းလို႔ရတဲ့ Temperature ႏွစ္ခု ကြာျခားခ်က္ difference ကို Error လို႔ေခၚပါတယ္။
      • ဒီ Error ေပၚမူတည္ၿပီး Controller က သူ႔ရဲ့ Output Signal ကို တြက္ခ်က္ ၿပီး ထုတ္ေပးပါတယ္။ ဒီ နမူနာ မွာေတာ့ Output က Controlled Device ျဖစ္တဲ့ valve ကို modulate (ထိန္းခ်ဳပ္) ၿပီး steam flow ကိုထိန္းခ်ဳပ္ျခင္း ျဖင့္ ထြက္လာတဲ့ Air Temperature ကို ေျပာင္းလဲ ေစပါတယ္။ ဒီနည္း နဲ႔ လိုခ်င္တဲ့ Air Temperature ရေအာင္ Control လုပ္ယူရတာ ျဖစ္ပါတယ္။
      • ဒီ Control Loop ကို ေအာက္မွာ နမူနာ ျပထားတဲ့ Block Diagram နဲ႔ ျပသ လို႔ရပါတယ္။ ( Matlab နဲ႔ Simulink လို႔ေခၚတဲ့ Software မွာ ဒီလို Block Diagram မ်ိဳး ေတြ ဒီဇိုင္း လုပ္ၿပီး Simulation လုပ္ လို႔ ရတာ မွတ္မိပါတယ္။ )

      • ဒီ လို လိုခ်င္တဲ့ အေျခအေန ကို ရေအာင္ ထိန္းခ်ဳပ္တာ က ခ်က္ျခင္း ေျပာင္းတာ မ်ိဳးမဟုတ္ပါဘူး။ Time Lag လို႔ ေခၚတဲ့ အခ်ိန္ ေနာက္က် တာ ရွိပါတယ္။ Modulate လုပ္ဘို႔ လည္း အခ်ိန္လိုပါတယ္။ Controlled Variable ရဲ့ တန္ဘိုးေျပာင္း ဘို႔လည္း အခ်ိန္ယူရပါတယ္။ Sensor ေတြ ကလည္း Controlled Variable ေျပာင္းေျပာင္းခ်င္း Response ရတာ မဟုတ္ျပန္ပါဘူး။ ဒါေၾကာင့္ Control Loop Performance ေတြ က ဒီ Time Lag ေတြ ေပၚ အမ်ားႀကီး မွီပါတယ္။ ဒီဇိုင္း လုပ္တဲ့ အခါ ဒီ Time Lag ေတြ ျဖစ္တဲ့ Sensor Response Time, Dead Time, Time Constant, First Order Lag စတဲ့ အေျခအေန ေတြ ကို ထည့္သြင္း စဥ္းစားေပးရပါတယ္။


    3. Type of Control Action
      1. Two-Position Action (Action related to Binary Output)
        • ဖြင့္တာ ပိတ္တာ ကို Controlled Variable ရဲ့ Input ကိုမူတည္ ၿပီး Controller Differential တစ္ခု ကို သတ္မွတ္ ရပါတယ္။ ဥပမာ အခန္းရဲ့ Temperature ကို Control လုပ္ဘို႔ FCU ရဲ့ Cooling Coil ကို အဖြင့္ အပိတ္ နဲ႔ ထိန္းမယ္ ဆိုရင္ Temperature က Low Temperature ထိရင္ Valve ကို ပိတ္မယ္။ High Temperature ကို ထိရင္ Valve ကို ဖြင့္မယ္ စသည္ျဖင့္ပါ။ သူ႔ရဲ့ သဘာဝ ကို ေအာက္မွာ ေဖာ္ျပေပးထား ပါတယ္။



      2. Modulating Control (Action related to Analog Output)
        • Modulating Control မွာ Controller's Output က သူ႔ entire range အတြင္း လိုအပ္သလို ေျပာင္းလဲႏိုင္ပါတယ္။ သံုးေလ့ရွိတဲ့ Term အခ်ိဳ႕ကို ေအာက္မွာ ေဖာ္ျပေပးထားပါတယ္။
          • Throttling Range : Controller က Controlled Device ရဲ့ အနည္းဆံုး ေနရာ နဲ႔ အမ်ားဆံုး ေနရာ ႏွစ္ခု ၾကားကို ေရႊ႕ေပး ႏိုင္ဘို႔ လိုအပ္တဲ့ Controlled Variable ထဲမွာ ေျပာင္းဘို႔ လိုအပ္တဲ့ အတိုင္းအတာ ကို ေခၚတာ ျဖစ္ပါတယ္။ ဥပမာ Temperature ကို ±5 ºC အတြင္း ထိန္းမယ္၊ +5 ºC ဆိုရင္ Valve 100% open, -5% ဆိုရင္ Valve လံုးလံုး closed ဆိုရင္ Temperature ေျပာင္းရင္ Valve က 100% ေျပာင္းပါတယ္။ ဒီ 10 ºC ကို Throttling Range လို႔ေခၚပါတယ္။
          • Control Pointဆိုတာက ေတာ့ Instrument က Control လုပ္ေနတဲ့ Controlled Variable ရဲ့ တကဲ့ တန္ဘိုး actual value ျဖစ္ပါတယ္။ ဒါက System Load အေျပာင္းအလဲ နဲ႔ အျခား variables ေတြ ေပၚမူတည္ ၿပီး Controller ရဲ့ Throttling Rangeအတြင္းမွာ ေျပာင္းလဲ ေနရတာ ျဖစ္ပါတယ္။
          • Offsetဆိုတာကေတာ့ set point နဲ႔ actual control point ၾကား ကြာေနတဲ့ error ကို ေခၚတာ ျဖစ္ပါတယ္။ Sensor ေတြမွာ လည္း တကယ့္တန္ဘိုး နဲ႔ Signal ၾကားမွာ ကြာျခားခ်က္ ရွိႏိုင္ပါတယ္။ ဒါကို လည္း Offset လို႔ေခၚပါတယ္။

        • သံုးေလ့ရွိတဲ့ Modulating Control ေတြ ကေတာ့
          1. Proportional Control
          2. Proportional-integral (PI) Control
          3. ProportionalIntegralDerivative controller (PID controller)
          4. Adaptive Control
          5. Fuzzy Logic

        • Proportional Control မွာ error ကိုပဲ အေျခခံ ၿပီး Output ကို အေျပာင္းအလဲ လုပ္ေပးႏိုင္ပါတယ္။ PI နဲ႔ PID Control ကေတာ့ အခ်ိန္ႏွစ္ခု ၾကားေျပာင္းတဲ့ ႏႈန္း ကိုပါ ထည့္သြင္း စဥ္းစား ထားေပးပါတယ္။
        • Building Automation မွာ သံုးေလ့ရွိတာ က Proportional Control နဲ႔ Proportional-integral (PI) Control ေတြပါ။
        • Adaptive Control ဆိုတာကေတာ့ Process ရဲ့ Dynamic Characteristics ေျပာင္းလဲမႈ ေပၚမူတည္ ၿပီး Controller က Parameter ေတြ ကို adjusts (ညွိ) ေပးပါတယ္။
        • Fuzzy Logic ဆိုတာကေတာ့ အေျခအေန တစ္ခု မွာ human operator ဘယ္လို response လုပ္မွာလဲ ဆိုတဲ့ "if-then" rules ေတြ ကိုသတ္မွတ္ၿပီး ထိန္းတာပါ။

      3. Combinations of Two-Position and Modulating
        • အခ်ိဳ႕ Control Loop ေတြ မွာေတာ့ Two-Position Components သံုးၿပီး Modulating response နီးပါးရေအာင္ လုပ္ယူႏိုင္တာ ေတြ႕ရပါတယ္။
          • Timed Two-Position Control
          • Floating Control
          • Incremental Control
          ဒီနည္း နဲ႔ ထိန္းတဲ့ အခါ Modulating Valve နီးပါးရတယ္ ဆိုေပမဲ့ ထိန္းရတာ က နဲနဲခက္ပါတယ္။ Chilled Water သံုးရတဲ့ စနစ္မွာ ဒီလို Valve ဖြင့္ပိတ္လုပ္တဲ့ အခါ Temperature Control မွာ မဆိုးလွေပမဲ့ Humidity Control ကေတာ့ ခက္ပါတယ္။


    4. Control Components
      1. Controlled Devices
        • Valve/Damper ေတြမွာရိွတဲ့ Flow Characteristics ေတြကို အထိုက္အေလ်ာက္ သိဘို႔ ႀကိဳးစားသင့္ပါတယ္။ Opening Percentage နဲ႔ Flowrate က Linearly တိုက္ရိုက္ အခ်ိဳးက် ျဖစ္ေလ့မရွိလို႔ပါ။ ဖြင္႔တာ အေႏွးအျမန္ ကို လိုက္ၿပီးလည္း ေျပာင္းႏိုင္ပါေသးတယ္။ Controlled Devices ေတြေရြးခ်ယ္တဲ့ အခါ အဖြင့္အပိတ္ အေႏွးအျမန္ (Stroke Time), ေရရွည္သံုးဘို႔ ယံုၾကည္ စိတ္ခ်ရ မခ်ရ နဲ႔ အျခား Parameter ေတြကို ကိုယ္သံုးမဲ့ application နဲ႔ သင့္ေတာ္မေတာ္ ႏိႈင္းခ်ိန္ ၾကည့္သင့္ပါတယ္။ သံုးမဲ့ Controller နဲ႔ ကိုက္ညီ (Compatible) ျဖစ္ဘို႔လည္း လိုအပ္ပါတယ္။ Status Feedback ေပးႏိုင္တဲ့ Controlled Devices ေတြ က ပိုၿပီး ကုန္က် ေပမဲ့ Controller အထြက္နဲ႔ တကဲ့ အေျခအေန ကို ေပးႏိုင္တာမို႔ အေရးႀကီး တဲ့ Application မွာ သံုးသင့္ပါတယ္။
        • အေသးစိတ္ ကို လိုအပ္တဲ့ အခါ စာဖတ္သူ ကိုယ္တိုင္ ရွာေဖြေလ့လာ ေစခ်င္ပါတယ္။


      2. Sensors
        Sensor ေတြ ေရြးခ်ယ္တဲ့ အခါ စဥ္းစားရမဲ့ အခ်က္ေတြ ကေတာ့
        • Operating range of controlled variable- သံုးမဲ့ အေျခအေန နဲ႔ ကိုက္ညီတဲ့ သင့္ေတာ္တဲ့ Signal ကိုထုတ္ေပးႏိုင္ရပါမယ္။ အနီးစပ္ဆံုး Range ကိုေရြးခ်ယ္ဘို႔ လိုအပ္ပါတယ္။
        • Compatibility of controller inputController လက္ခံႏိုင္တဲ့ electronic signal ကို ထုတ္ေပး ႏိုင္ရပါမယ္။ ဥပမာ ေျပာရရင္ industry standard signal ေတြျဖစ္တဲ့ 4 to 20 mA or 0 to 10 V (dc) လိုမ်ိဳးပါ။
        • Accuracy and repeatability- အခ်ိဳ႕ Control Applications ေတြမွာ controlled variable က လိုခ်င္တဲ့ desired set point အနားမွာ ကပ္ေနတတ္ပါတယ္။ [ ဥပမာ Temperature ± 1.1 ºC (± 2 ºF) RH ± 5% ဆိုတာမ်ိဳးပါ။] ဒီအေျခအေန မွာ သူ႔ထက္ တိက်တဲ့ Accuracy လိုလာပါတယ္။ Temperature Sensor က အနည္းဆံုး ± 0.5 ºC ေလာက္မွ မရႏိုင္ရင္ Temperature Control ± 1.1 ºC လုပ္ဘို႔ မျဖစ္ႏိုင္ပါဘူး။ ဒီလိုပဲ RH Control ± 5% ရဘို႔ ဆိုရင္ Sensor Accuracy က ± 2% ေလာက္အတြင္း ျဖစ္ေနဘို႔ လိုအပ္ပါတယ္။ Sensor Accuracy က လည္း အၿမဲတန္း ၿငိမ္ေနတာ လည္း မဟုတ္ပါဘူး (အထူးသျဖင့္ Humidity Sensor)။ ဒါေၾကာင့္ လိုအပ္သလို re-calibrate လုပ္ဘို႔လည္း လိုအပ္ တတ္ပါေသးတယ္။ Sensor Accuracy က အရမ္းေကာင္း ေနရင္ေတာင္မွ ေအာက္မွာေပးထားတဲ့ အခ်က္ေလးခ်က္ က တစ္ခ်က္ခ်က္ နဲ႔ ညိရင္ Set point ကိုထိန္းထားဘို႔ မလြယ္ပါဘူး။
          1. the controller is unable to resolve the input signal,
          2. the controlled device cannot be positioned accurately,
          3. the controlled device exhibits excessive hysteresis, or
          4. disturbances drive its system faster than the controls can regulate it.
        • Sensor response time- sensor/transducer ေတြနဲ႔ သက္ဆိုင္တဲ့ response curve က controlled variable ေျပာင္းတာနဲ႔လိုက္ၿပီး Sensor Output ဘယ္လိုေျပာင္းတယ္ ဆိုတာ ကို ျပပါတယ္။ Process ရဲ့ Time Constant က နည္းတယ္ဆိုရင္ Fast response time ရွိတဲ့ sensor ကိုသံုးရပါမယ္။
        • Control agent properties and characteristicsSensor ထည့္ထားရမဲ့ ေနရာ က Control Agent (ေလ၊ ေရ၊ Fluid စသည္။) က Sensor ကို စား (corroded) ပ်က္စီးေစမယ္။ ဒါမွ မဟုတ္ Sensor ရဲ့ performance ကိုေလ်ာ့က်ေစမယ္ ဆိုရင္ ဒီ Control Agent နဲ႔ တိုက္ရိုက္ မထိလို႔ ရတဲ့ ေရြးခ်ယ္စရာ (သို႔) ဒါဏ္ခံႏိုင္တဲ့ အျခား Sensor ကိုေရြးခ်ယ္ရပါလိမ့္မယ္။
        • Ambient environment characteristicsပတ္ဝန္းက်င္ အေျခအေန ေတြ (ဥပမာ Temperature & Humidity အေျပာင္းအလဲ) က Sensor ရဲ့ accuracy ကို မထိခုိက္ေစဘို႔ သတိျပဳရပါမယ္။ ဒီလိုပါပဲ အျခား ဓာတ္ေငြ႕ နဲ႔ Chemical ေတြ၊ electromagnetic interference (EMI) ေတြ ကလည္း Sensor ကို Degrade ျဖစ္ေစ၊ ထိခုိက္ ပ်က္စီး ေစႏိုင္ ပါေသးတယ္။ ဒီလို အေျခအေန ကို ကာကြယ္ဘို႔ လိုအပ္ရင္ Special Sensor or transducer housing ကိုအသံုးျပဳႏိုင္ပါတယ္။

      3. Controllers
        1. DDC (Direct Digital Control)
          • BAS မွာ အဓိက အသံုးမ်ားတာ ကေတာ့ DDC ပါ။ DDC မွာ Microprocessors နဲ႔ Firmware/Software ပါဝင္တဲ့ MicroComputer ပါဝင္ၿပီး control logic ကို ေဆာင္ရြက္ ေပးႏိုင္ပါတယ္။ သူ က Digital / Analog Input ေတြကို လက္ခံ ႏိုင္သလို ဒီအခ်က္အလက္ ေတြကို Operator သြင္းထားတဲ့ Set point နဲ႔ အျခား အခ်က္အလက္ ေတြနဲ႔ ႏိႈင္းယွဥ္ တြက္ခ်က္ၿပီး သင့္ေတာ္တဲ့ Digital / Analog Output ကို္လည္း ထုတ္ေပးႏိုင္ ပါတယ္။
          • ၿပီးေတာ့ DDC အားလံုးနီးပါး က Programmable ပါ။ လိုခ်င္တဲ့ Control Programming ကို Notebook Computer (သို႔) Handheld Units မွာ ဒီဇိုင္းလုပ္ ၿပီး Controller ထဲကို Download လုပ္ႏိုင္ပါတယ္။
          • DDC ေတြကို Stand-alone ပဲျဖစ္ျဖစ္၊ အျခား BAS system ေတြနဲ႔ network သံုးၿပီး integrate လုပ္လို႔ပဲ ျဖစ္ျဖစ္ သံုးႏိုင္ပါတယ္။ DDC ရဲ့ Advantages ေတြကေတာ့၊
            • Control Sequence / Equipment ေတြ ကို Hardware မွာေျပာင္းစရာ မလိုပဲ Software ထဲမွာတင္ ေျပာင္းလို႔ရျခင္း။
            • Demand Setback, reset, data logging, diagnostics နဲ႔ time-clock integration စတဲ့ features ေတြ ကို ေစ်း သက္သက္သာသာ နဲ႔ Controller ထဲကို ထည့္သြင္း ေပးႏိုင္ျခင္း။
            • တိက်တဲ့ (Precise & Accurate Control) ကိုရႏိုင္ျခင္း။ (Sensor ရဲ့ Resolution နဲ႔ Analog to Digital, Digital to Analog Conversion Process ေတြရဲ့ Limit ကိုမွီတာက လြဲရင္ေပါ့ေလ။) PID နဲ႔ အျခား Control Algorithm ေတြကို Mathematically Implement လုပ္ႏိုင္ပါတယ္။
            • open network သံုးလို႔ပဲ ျဖစ္ျဖစ္ proprietary (မူပိုင္) နဲ႔ပဲျဖစ္ျဖစ္ Control ေတြအခ်င္းခ်င္း ဆက္သြယ္ Communicate လုပ္ႏိုင္ ျခင္း။
            • ထိန္းခ်င္တဲ့ Setpoint, Limits, Alarm Setting, Delay, Schedule ေတြ ကို Controller Memory ထဲ တစ္ခါထည့္ထားရင္ ေနာက္ထပ္ တမင္တကာ မျပင္မခ်င္း (သို႕) Controller မပ်က္မခ်င္း မေပ်ာက္မပ်က္ ရွိေနႏိုင္ ျခင္း။ (အခ်ိဳ႕ Memory ေတြ က ေတာ့ Power Supply မရွိရင္ ရက္ပိုင္းပဲ ခံတာ ျဖစ္ႏိုင္ပါတယ္။ အမ်ားစု ကေတာ့ Memory ထဲ မွာ ေရရွည္ မပ်က္မစီး တည္ရွိေနႏိုင္ပါတယ္။)
          • HVAC System ရဲ့ Control အမ်ားစု က DDC control ျဖစ္ပါတယ္။

        2. Electric/Electronic Controllers

        3. Pneumatic Receiver-Controllers
          • Pneumatic ဆိုတာကေတာ့ Compressed Air ကိုသံုးတဲ့ Controller ေတြပါ။ အေသးစိတ္ ကို ေတာ့ ဒီေနရာ မွာ မေဖၚျပေတာ့ပါဘူး။

        4. Thermostats
          • Thermostat ဆိုတာကေတာ့ အမ်ားသိၾကတဲ့ အတိုင္း control နဲ႔ Sensing functions ႏွစ္ခု ေပါင္းထားတဲ့ Device တစ္ခုပါ။ အမ်ားအားျဖင့္ micro-processor based ျဖစ္ၿပီး သူ႔ဟာသူ အလုပ္လုပ္ႏိုင္ပါတယ္။ အေသးစိတ္ ကို ေတာ့ မေဖၚျပေတာ့ပါဘူး။


    5. Communication Networks for BAS
      1. Communication Protocol
        • Integrated Building Management System လုပ္ေတာ့မယ္ ဆိုရင္ အဓိက ေခါင္းခဲရေလ့ ရွိတာ ကေတာ့ Communication protocol ပါ။
        • System တစ္ခု နဲ႔ တစ္ခု ေကာင္းေကာင္း ဆက္သြယ္ႏိုင္ဘို႔ အတြက္ protocol တစ္ခုကို ဘာသာစကား တစ္ခု အေနနဲ႔ သံုးရပါတယ္။ ခက္တာက manufacturer အမ်ားစု က သူတို႔ကိုယ္ပိုင္ proprietary protocol ကို သံုးခ်င္ၾကပါတယ္။ အမ်ားဘံုသံုး open standards ေတြကလည္း DeviceNet, SOAP, XML, BACnet, LonWorks and Modbus စသည္ျဖင့္ အမ်ားႀကီး ရွိေနျပန္ပါတယ္။ Proprietary ကေန Open Standard ကို ေျပာင္းေပးႏုိင္တဲ့ Hardware (or) Software Module ေတြ ရွိေပမဲ့ 100% စိတ္ခ်ရတယ္ လို႔ မဆိုႏိုင္ ေသးပါဘူး။ ASHRAE Handbook ထဲမွာေတာ့ Protocol ကို classes သံုးခု ခြဲထားပါတယ္။
          1. Standard protocol. Published and controlled by a standards body.
          2. Public protocol. Published but controlled by a private organization.
          3. Private protocol. Unpublished; use and specification controlled by a private organization. Examples include the proprietary communications used by many building automation devices.
        • ဒါေၾကာင့္ Integrated Building Management System လုပ္ေတာ့မယ္ ဆိုရင္ သတိထားရမွာ က ဘယ္ Standard Protocol ကိုသံုးမွာလဲ ဆိုတာ ျဖစ္ပါတယ္။ အထူးသျဖင့္ existing building ေတြကို retrofit လုပ္ရေတာ့မယ့္ အေျခအေန မွာ Existing Control System အေၾကာင္း သိဘို႔ လိုအပ္ပါတယ္။

      2. Network Structure
        • BAS Network အမ်ားစု က Computer Network Technology ကိုသံုးစြဲေနၾကၿပီ ျဖစ္ပါတယ္။ IT backbone နဲ႔ Communication Protocol ေတြ ကို သံုးၿပီး Communication လုပ္တာပါ။ Wired ေရာ Wireless Technology ေရာ စံုေအာင္ သံုးႏိုင္ၿပီ ျဖစ္ပါတယ္။ Communication Task ေတြမွာ ပါဝင္ႏိုင္တာ ကေတာ့။
          • Data Exchange : အခ်က္အလက္ ေတြ ဖလွယ္တာ
          • Alarms and Events: ဘယ္စနစ္၊ ဘယ္ေနရာ မွားေနလဲ ဆိုတာ သတင္းေပးဘို႔၊ နဲ႔ အျခားအေျခအေန ေတြ။
          • Schedule : Equipment ေတြကို ဘယ္အခ်ိန္၊ ဘယ္လို အစီအစဥ္ နဲ႔ run မယ္ ဆိုတာ ကို စီမံခန္႔ခြဲ ႏိုင္ဘို႔
          • Trends : Data ေတြ အခ်ိန္ကာလ တစ္ခု အတြင္း ဘယ္လို ေျပာင္းသြားလဲ ဆိုတာ သိဘို႔ မွတ္ထားတဲ့ Data History ကို Trend လို႔ေခၚတာပါ။
          • Network Management : Network diagnostic and Maintenance functions, data access, security functions, etc.


    6. Specifying DDC Systems
      • DDC installation ေအာင္ေအာင္ ျမင္ျမင္ ရရွိဘို႔ အတြက္ Customer ရဲ့ လိုအပ္ခ်က္ ကို ျဖည့္ဆီး ႏိုင္မဲ့ ရွင္းလင္း ျပတ္သားစြာ ေဖာ္ျပထားတဲ့ specification လိုအပ္ပါတယ္။ Specification မွာ ပါဝင္ရမွာ ေတြ ကေတာ့။
        • Descriptions of the products desired, or of the performance and features expected
        • Needed points (Points Schedule) or data objects should be listed
        • A control schematic shows the layout of each system to be controlled, including instrumentation and input/output objects and any hard-wired interlocks.
        • A sequence of operation should be provided for each system.
        ပိုၿပီး အေသးစိတ္ သိခ်င္ရင္ေတာ့ ASHRAE Guideline 13. ASHRAE (2005) ကိုေလ့လာပါ။


    - Back to Top -

  4. Control Examples
    • ေနာက္ လာမဲ့ Post ေတြ မွာ တစ္ခုခ်င္း ေဖာ္ျပေပးသြားမွာ ျဖစ္ပါတယ္။
    • ေရးသားေပး ထားၿပီးတာ ေတြ ကေတာ့
      1. Chilled Water Fan Coil Units

    - Back to Top -

  5. References
    1. "Fundamental of Control", Chapter 7, ASHRAE Handbook: Fundamentals, 2009.
    2. "Design and Applications of Controls", Chapter 46, ASHRAE Handbook: HVAC Applications, 2007.
    3. "Controls", Chapter 10, Air-Conditioning Systems Design Manual, ASHRAE, 1993.

    4. Standard Protocols
      1. Lonworks by Lonmark International [ http://www.lonmark.org/ ]
      2. BACnet by ASHRAE [ http://www.bacnet.org/ ]
      3. Modbus [ http://www.modbus.org/ ]
      4. DeviceNetTM by ODVA [ http://www.odva.org/ ]
      5. SOAP ( Simple Object Access Protoco) by W3 [ http://www.w3.org/TR/soap/ ]
      6. XML by W3 [ http://www.w3.org/2004/02/XML-Protocol-Charter ]


    5. BAS System Providers
      1. Siemens [ http://www.automation.siemens.com/_en/portal/index.htm ]
      2. Honeywell [ http://acscorp.honeywell.com/Pages/default.aspx ]
      3. Johnson Controls [ http://www.johnsoncontrols.com/ ]
      4. Yamatake [ http://www.yamatake.com/ ]
      5. Trend Controls
        [ http://chawlwin.blogspot.com/2009/09/ http:/www.trend-controls.com ]

      6. TAC [ http://www.tac.com/ ]
      7. Trane [ http://www.trane.com/COMMERCIAL/Controls/Default.aspx?i=875 ]


    6. Electronic Controllers
      1. Omron Industrial Automation : Floatless Level Controllers
        [ http://www.omron-ap.com/product_info/61F/index.asp ]


    7. Wiki References
      1. Automatic Control
        [ http://en.wikipedia.org/wiki/Automatic_control ]

      2. Building Automation
        [ http://en.wikipedia.org/wiki/Building_Automation ]

      3. Control Theory [ http://en.wikipedia.org/wiki/Control_theory ]
      4. SCDA (Supervisory Control And Data Acquisition)
        [ http://en.wikipedia.org/wiki/SCADA ]

      5. Proportional Control
        [ http://en.wikipedia.org/wiki/Proportional_control ]

      6. PI Controller
        [ http://en.wikipedia.org/wiki/PI_controller ]

      7. PID Loop [ http://en.wikipedia.org/wiki/PID_loop ]
      8. Digital Control
        [ http://en.wikipedia.org/wiki/Digital_control ]

      9. DDC (Direct Digital Control)
        [ http://en.wikipedia.org/wiki/Direct_Digital_Control ]

      10. Fuzzy Control System
        [ http://en.wikipedia.org/wiki/Fuzzy_control_system ]

      11. Adaptive Control [ http://en.wikipedia.org/wiki/Adaptive_control ]
      12. Variable Frequency Drive
        [ http://en.wikipedia.org/wiki/Variable_frequency_drive ]

      13. Lux [ http://en.wikipedia.org/wiki/Lux ]
      14. http://en.wikipedia.org/wiki/Thermistor[ http://en.wikipedia.org/wiki/Thermistor ]


ဆက္ဖတ္ရန္>>>